You seem to have quite a number of development versions in there, I just
used the current version throughout. I am a bit wary now about changing
things too much as most of it works. My versions are...
autorespond-1.0.0
ezmlm-0.53
vpopmail-4.9.4
sqwebmail-1.0.2 (no patch)
qmailadmin-0.38
not using courier-imap
ucspi-tcp-0.88
daemontools-0.70
qmail-1.03
the only thing that doesn't work is qmailadmin. sqwebmail worked first
go no problem, all I told it about were my apache directories nothing else.
All I told qmailadmin where the locations of the apache directories and
those for autorespond and ezmlm. I haven't done anything with the last two
apart from install them. Might I have overlooked something?
What would YOU do?
Howard
At 10:56 03/11/00 -0500, you wrote:
>OK, step by step working details of versions and order.
>Install ucspi-tcp-0.88, daemontools-0.70, qmail-1.03.
>Then install with all current version from inter7 (sqwebmail requires a
>patch to work with this version of vpopmail, it's on the vpopmail page)
>autorespond-1.0.0, ezmlm-0.53, vpopmail-4.9.5, sqwebmail-1.0.2 (plus patch),
>qmailadmin-0.39, courier-imap-1.2.1
>
>Here are my configure lines, you will have to change some settings.
>vpopmail
>./configure --enable-default-domain=cimx.com --enable-passwd=n
>--enable-tcpserver-file=/var/qmail/smtp/tcp.smtp --enable-logging=e
>
>courier-imap
>./configure --enable-workarounds-for-imap-client-bugs --without-authmysql --
>without-authpwd --without-authldap --without-authpam --without-authuserdb --
>with-authvchkpw
>
>sqwebmail
>./configure --without-authmysql --without-authpwd --without-authldap --witho
>ut-authpam --without-authuserdb --with-authvchkpw --enable-https --enable-we
>bpass=vpopmail
>
>
>
>-----Original Message-----
>From: Howard Miller [mailto:[EMAIL PROTECTED]]
>Sent: Friday, November 03, 2000 6:34 PM
>To: [EMAIL PROTECTED]
>Subject: RE: cgi error with qmailadmin
>
>
>So which versions DO work properly together?
>
>I started from a clean install of SuSE 7 downloaded all the latest (I
>assume) versions of qmail et al. Everything works except qmailadmin to
>which I cannot log in, I just get CGI errors after the login screen. It
>doesn't matter what I put in. I may of course have made a mistake in the
>build as there are a few configuration parameters to get wrong.
>
>I am still having problems.
>
>Howard
>
>At 10:12 03/11/00 -0500, you wrote:
> >I just rebuilt one of my mail servers Wednesday, starting from a tar'd
> >backup of nothing but my /var/qmail and /home/vpopmail.
> >I installed qmail version 1.03, ucspi-tcp-0.88, daemontools 0.70, vpopmail
> >4.9.5, ezmlm 0.53, autorespond 1.0.0, qmailadmin 0.39, sqwebmail-1.0.2, and
> >courier-imap-1.2.1.
> >
> >I had none of the problems mentioned.
> >My tests of the same:
> >1. - Trying to log into qmailadmin with an invalid domain or password, I
>get
> >Invalid Login
> >2. - Trying to log into sqwebmail with more than one @ in the username, I
> >get INVALID USER ID OR PASSWORD
> >3. - Trying to log into sqwebmail with an invalid username or password, I
> >get INVALID USER ID OR PASSWORD
> >
> >I think the real solution is to use the packages with the versions they are
> >intended to be used with. Each package you used, qmailadmin, sqwebmail,
>and
> >in my case courier-imap are dependant on vpopmail. They are dependant on a
> >particular version as well, which is why you were seeing problems. Every
> >time I install vpopmail I also reinstall the corresponding versions of
> >qmailadmin, sqwebmail, and courier-imap, for the above reasons.
> >
> >FYI, vpopmail install is not destructive and you do not need to stop qmail
> >to install/upgrade it.
> >
> >
> >
> >-----Original Message-----
> >From: Alfredo Hassaf [mailto:[EMAIL PROTECTED]]
> >Sent: Thursday, November 02, 2000 2:28 PM
> >To: [EMAIL PROTECTED]
> >Subject: RE: cgi error with qmailadmin
> >
> >
> >This is curious, yesterday I had the same problem and spend all day trying
> >to fix it, finnally I did but this is what I saw:
> >
> >If you have a totally clean machine, this is with nothing installed but
> >Linux, and you go and install all newest versions of qmaladmin, vpopmail,
> >sqwebmail, for sure youll have problems, this are the problems I detected:
> >
> >I installed yesterday this packages: qmail version 1.03, ucspi-tcp-0.88,
> >daemontools 0.70, vpopmail 4.9.4, ezmlm 0.53, autorespond 1.0.0, qmailadmin
> >0.38, sqwebmail 0.34b and had this problems...
> >
> >1.- Trying to log into qmailadmin with an invalid domain or password, youll
> >get the error you mention and the log says:
> >Premature end of script
> >headers: /home/httpd/cgi-bin/qmailadmin
> >WARNING: chdir to /home/vpopmail/domains/dsad failed
> >
> >2.- Trying to log into sqwebmail with more than one @ in the username,
> >youll get the error you mention, and the log says:
> >Premature end of script
> >headers: /home/httpd/cgi-bin/sqwebmail
> >WARNING: chdir to /home/vpopmail/domains/sds failed (EVEN IF sds exists)
> >
> >3.- Trying to log into sqwebmail with an invalid username or password,
> >youll get the error you mention, and the log says:
> >Premature end of script
> >headers: /home/httpd/cgi-bin/sqwebmail
> >WARNING: chdir to /home/vpopmail/domains/sds failed (EVEN IF sds exists)
> >
> >I thought OK, lets install the latest version of sqwebmail and the latest
> >version of qmaladmin, since the ones I?ve installed were not the newest. I
> >did but still get the same errors.
> >
> >Heres the solution....
> >
> >The problem is not with sqwebmail or qmailadmin, the real problem is with
> >vpopmail, vpopmail 4.9.4 installed on a new machine doesnt work fine, I
> >discover this because the other servers where I ve qmail installed on have
> >no problems but the history is different, this servers had originally
> >vpopmail 4.9 and I upgrated to vpopmail 4.9.4 and work excellent, so when
> >yesterday I installed qmail again I did not installed vpopmail 4.9 I
> >installed vpopmail 4.9.4 and the problems began, so I recomend you to....
> >
> >1.- Stop qmail
> >2.- If you have vpopmail installed make clean on it then Install vpopmail
> >4.9
> >3.- Install or reinstall qmailadmin, sqwebmail (any version)
> >4.- Start qmail, make tests, you should not have any problems at this
>point.
> >5.- stop qmail
> >6.- make clean on vpopmail 4.9
> >7.- Install vpopmail 4.9.4
> >8.- Start qmail
> >9.- If you have problems with qmailadmin or sqwebmail reinstall them again
> >(be sure to make clen first).
> >10.- You should have no problems at all if you do this.
> >
> >I dont really dont know why but I imagine that there are some files in
> >vpopmail 4.9 that works fine and the same files doesnt works fine on
> >vpopmail 4.9.4, or whatever, this is really a case that the gurus in qmail
> >like Ken Jones will have to work out.
> >
> >I was going to post this situation yesterday but I had no time, I hope it
> >works for you... In case you dont have vpopmail 4.9 I attached it here....
> >
> >Maybe this problem helps for other bugs that are arround and no body knows
> >where they start...
> >
> >Jose Alfredo Hassaf Abraham
> >Director de Desarrollo e Internet
> >Quitze S.A. de C.V.
> >5545-1286 y 5545-1287
> >
> >
> >-----Original Message-----
> >From: Howard Miller [mailto:[EMAIL PROTECTED]]
> >Sent: Jueves 2 de Noviembre de 2000 7:50 PM
> >To: [EMAIL PROTECTED]
> >Subject: cgi error with qmailadmin
> >
> >
> >I have installed qmailadmin and got it to run at least to the point where
> >the logon screen appears.
> >
> >I have set up a domain sql.marketingms.com. Which does exist and work
> >properly.
> >
> >I type in postmaster, sql.marketingms.com, <password> click on login and I
> >get an Error 500 internal server error.
> >
> >On inspecting httpd logs I get
> >
> >WARNING: chdir to /home/vpopmail/domains/sql.marketingms.com failed
> >[Thu Nov 2 16:32:42 2000] [error] [client 62.253.246.250] Premature end of
> >scri
> >pt headers: /usr/local/httpd/cgi-bin/qmailadmin
> >
> >The directory it supposedly can't chdir to DOES exist by the way.
> >
> >Any offers??
> >
> >Thanks
> >
> >Howard
