Hi Finn, Thank you, never saw your email, got it in the archive, email is up and running again.
submission still does not work without STARTTLS encryption, but at least the email is flowing again. Thanks you, Dieter -----Original Message----- Date: Mon, 25 Jan 2021 08:48:22 +0200 Subject: Re: [qmailtoaster] Error when trying to send on submission port To: [email protected] From: Dieter Febel <[email protected]> Hi Eric, I restarted the server, now its refusing connections on port 25. So no incoming email. I reverted to : QMAILDUID=`id -u vpopmail` NOFILESGID=`id -g vpopmail` MAXSMTPD=`cat /var/qmail/control/concurrencyincoming` SMTPD="/var/qmail/bin/qmail-smtpd" TCP_CDB="/etc/tcprules.d/tcp.smtp.cdb" HOSTNAME=`hostname` VCHKPW="/home/vpopmail/bin/vchkpw" REQUIRE_AUTH=0 export FORCETLS=0 export SMTPAUTH="+cram" exec /usr/bin/softlimit -m 104000000 \ /usr/bin/tcpserver -v -R -H -l $HOSTNAME -x $TCP_CDB -c "$MAXSMTPD" \ -u "$QMAILDUID" -g "$NOFILESGID" 0 smtp \ $SMTPD $VCHKPW /bin/true 2>&1 tcp.smtp 127.:allow,RELAYCLIENT="",BADMIMETYPE="",BADLOADERTYPE="M",CHKUSER_RCPT LIMIT="50",CHKUSER_WRONGRCPTLIMIT="10",NOP0FCHECK="1",QMAILQUEUE="/var/ qmail/bin/simscan",DKQUEUE="/var/qmail/bin/qmail- queue.orig",DKVERIFY="DEGIJKfh",DKSIGN="/var/qmail/control/domainkeys/% /private" telnet xxxxx.xxx.xxx 25 Trying xxx.yyy.zzz.ccc ...telnet: Unable to connect to remote host: Connection refused Could you please help? I also restarted after I reverted the changes. Kind regards, Dieter -----Original Message----- Date: Sun, 24 Jan 2021 10:17:49 -0700 Subject: Re: [qmailtoaster] Error when trying to send on submission port To: [email protected] Reply-to: [email protected] From: Eric Broch <[email protected]> Are there two submission daemons running? Restart server. On 1/24/2021 9:10 AM, [email protected] wrote: > You need to have Your /var/qmail/supervise/smtp/run (port 25) as > below > > #!/bin/sh > QMAILDUID=`id -u vpopmail` > NOFILESGID=`id -g vpopmail` > MAXSMTPD=`cat /var/qmail/control/concurrencyincoming` > SPAMDYKE="/usr/bin/spamdyke" > SPAMDYKE_CONF="/etc/spamdyke/spamdyke.conf" > SMTPD="/var/qmail/bin/qmail-smtpd" > TCP_CDB="/etc/tcprules.d/tcp.smtp.cdb" > HOSTNAME=`hostname` > VCHKPW="/home/vpopmail/bin/vchkpw" > export SMTPAUTH="-" > > exec /usr/bin/softlimit -m 128000000 \ > /usr/bin/tcpserver -v -R -H -l $HOSTNAME -x $TCP_CDB -c > "$MAXSMTPD" \ > -u "$QMAILDUID" -g "$NOFILESGID" 0 smtp \ > $SPAMDYKE --config-file $SPAMDYKE_CONF \ > $SMTPD $VCHKPW /bin/true 2>&1 > > > > Then have the change (copy the lines from Eric' mail) into the > /var/qmail/supervise/submission/run (port 587) > > > and lastly here is my /var/run/supervise/smtps/run for port 465 > > #!/bin/sh > QMAILDUID=`id -u vpopmail` > NOFILESGID=`id -g vpopmail` > MAXSMTPD=`cat /var/qmail/control/concurrencyincoming` > SMTPD="/var/qmail/bin/qmail-smtpd" > TCP_CDB="/etc/tcprules.d/tcp.smtp.cdb" > HOSTNAME=`hostname` > VCHKPW="/home/vpopmail/bin/vchkpw" > export SMTPS=1 > export FORCETLS=0 > export SMTPAUTH="!+cram" > > exec /usr/bin/softlimit -m 128000000 \ > /usr/bin/tcpserver -v -R -H -l $HOSTNAME -x $TCP_CDB -c > "$MAXSMTPD" \ > -u "$QMAILDUID" -g "$NOFILESGID" 0 465 \ > $SMTPD $VCHKPW /bin/true 2>&1 > > I may say all 3 run files are default settings from Erics install > script - only change I may recall is the softlimit that may have > been > increased > > My clients (mostly TB) are using ssl/tls - encrypted (name/passwd) > settings and are only using 465 or 587 to submit mails > port 25 is only for server to server delivery 😏 > > Hope this may help > > > Regards > > Finn > > PS I'm on Centos8 and Qmail for same - perfect > > > Den 24-01-2021 kl. 07:31 skrev Dieter Febel: > > Hi Eric, > > > > I changed the file to what you recommended, but I am still getting > > the same error. I have authentication turned on in the email > > client, > > and no encryption. > > The reported error was "MAIL FROM command failed: Authorization > > required (#5.7.1)". > > > > #!/bin/sh > > QMAILDUID=`id -u vpopmail` > > NOFILESGID=`id -g vpopmail` > > MAXSMTPD=`cat /var/qmail/control/concurrencyincoming` > > SMTPD="/var/qmail/bin/qmail-smtpd" > > TCP_CDB="/etc/tcprules.d/tcp.smtp.cdb" > > HOSTNAME=`hostname` > > VCHKPW="/home/vpopmail/bin/vchkpw" > > export SMTPAUTH="!" > > exec /usr/bin/softlimit -m 128000000\ > > /usr/bin/tcpserver -v -R -H -l $HOSTNAME -x $TCP_CDB -c > > "$MAXSMTPD" \ > > -u "$QMAILDUID" -g "$NOFILESGID" 0 587 \ > > $SMTPD $VCHKPW /bin/true 2>&1 > > > > > > > > > > > > -----Original Message----- > > > > *Date*: Sat, 23 Jan 2021 10:17:11 -0700 > > *Subject*: Re: [qmailtoaster] Error when trying to send on > > submission > > port > > *To*: [email protected] > > <mailto:[email protected]> > > Reply-to: [email protected] > > *From*: Eric Broch <[email protected] > > <mailto:eric%20broch%20%[email protected]%3e>> > > > > #!/bin/sh > > QMAILDUID=`id -u vpopmail` > > NOFILESGID=`id -g vpopmail` > > MAXSMTPD=`cat /var/qmail/control/concurrencyincoming` > > SMTPD="/var/qmail/bin/qmail-smtpd" > > TCP_CDB="/etc/tcprules.d/tcp.smtp.cdb" > > HOSTNAME=`hostname` > > VCHKPW="/home/vpopmail/bin/vchkpw" > > export SMTPAUTH="!" > > > > exec /usr/bin/softlimit -m 128000000 \ > > /usr/bin/tcpserver -v -R -H -l $HOSTNAME -x $TCP_CDB -c > > "$MAXSMTPD" \ > > -u "$QMAILDUID" -g "$NOFILESGID" 0 587 \ > > $SMTPD $VCHKPW /bin/true 2>&1 > > > > On 1/23/2021 10:09 AM, Dieter Febel wrote: > > > Hi list, > > > > > > The server only allows sending of email on port 465 or port 25. > > > When > > > I change to 587 with plain or with encryption I get: > > > > > > Port 587 plain: The reported error was "MAIL FROM command > > > failed: > > > Authorization required (#5.7.1)". (Authentication is enabled in > > > the > > > mail client) > > > > > > Here is my /var/qmail/supervise/smtp/run > > > QMAILDUID=`id -u vpopmail` > > > NOFILESGID=`id -g vpopmail` > > > MAXSMTPD=`cat /var/qmail/control/concurrencyincoming` > > > SMTPD="/var/qmail/bin/qmail-smtpd" > > > TCP_CDB="/etc/tcprules.d/tcp.smtp.cdb" > > > HOSTNAME=`hostname` > > > VCHKPW="/home/vpopmail/bin/vchkpw" > > > REQUIRE_AUTH=0 > > > export FORCETLS=0 > > > export SMTPAUTH="+cram" > > > exec /usr/bin/softlimit -m 104000000 \ > > > /usr/bin/tcpserver -v -R -H -l $HOSTNAME -x $TCP_CDB -c > > > "$MAXSMTPD" \ > > > -u "$QMAILDUID" -g "$NOFILESGID" 0 smtp \ > > > $SMTPD $VCHKPW /bin/true 2>&1 > > > > > > And my tcp.smtp > > > 127.:allow,RELAYCLIENT="",BADMIMETYPE="",BADLOADERTYPE="M",CHKUSE > > > R_RCPTLIMIT="50",CHKUSER_WRONGRCPTLIMIT="10",NOP0FCHECK="1",QMAIL > > > QUEUE="/var/qmail/bin/simscan",DKQUEUE="/var/qmail/bin/qmail- > > > queue.orig",DKVERIFY="DEGIJKfh",DKSIGN="/var/qmail/control/domain > > > keys/%/private" > > > > > > > > > Any ideas? > > > > > > Kind regards, > > > > > > Dieter > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [email protected] > m > For additional commands, e-mail: qmailtoaster-list-help@qmailtoaster. > com > --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] m
