Hi The last month I rebuilt 3 qmail servers and all working I shut one down as I only need two of them and do not recall all the issues Gary is having. Gary I did offer my help I was not going to ask for any compensation btw as I had some time. Going out of town now so it will be hard at this time email only. But not sure why all this issues.
Remo -- Sent from iPhone > On giovedì, feb 22, 2024 at 17:43, Eric Broch <[email protected] > (mailto:[email protected])> wrote: > > I did another fresh install of Rocky9/QMT and I can't seem to duplicate the > problem you're having. > > > > > > On 2/22/2024 12:48 PM, Eric Broch wrote: > > > > Mine as well. It'd be nice to see some errors in the httpd log. > > > > > > > > > > > > On 2/22/2024 11:15 AM, Gary Bowling wrote: > > > > > > > > > > > > > > > > > > Thanks. So Eric, my version is 8.0.3 as I stated previously. > > > > > > > > > > > > > > > > > > > > > > > > php -v > > > PHP 8.0.30 (cli) (built: Aug 3 2023 17:13:08) ( NTS gcc x86_64 ) > > > Copyright (c) The PHP Group > > > Zend Engine v4.0.30, Copyright (c) Zend Technologies > > > with Zend OPcache v8.0.30, Copyright (c), by Zend Technologies > > > > > > > > > > > > > > > > > > > > > Thanks, gb > > > > > > > > > > > > > > > > > > > > > On 2/22/2024 1:11 PM, Remo Mattei wrote: > > > > Gary, > > > > Yes default is php 8.0.3 I just upgraded afterwards to 8.3 you are fine > > > > on the default installation php. Sorry for the confusion. > > > > > > > > Remo > > > > > > > > > On Feb 22, 2024, at 10:05, Gary Bowling <[email protected]> > > > > > (mailto:[email protected]) wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Not sure what you're saying Remo. My version is 8.0.3, and from your > > > > > command it looks like yours is as well. I didn't upgrade to anything, > > > > > just installed Rocky 9. Maybe you meant 8.0.3 instead of 8.3. > > > > > > > > > > > > > > > > > > > > gb > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 2/22/2024 12:52 PM, Remo Mattei wrote: > > > > > > I just upgraded to 8.3 myself seems you can do that no problem but > > > > > > keep 8 there Gary. > > > > > > > > > > > > Remo > > > > > > > > > > > > > On Feb 22, 2024, at 09:50, Gary Bowling <[email protected]> > > > > > > > (mailto:[email protected]) wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > php -v > > > > > > > PHP 8.0.30 (cli) (built: Aug 3 2023 17:13:08) ( NTS gcc x86_64 ) > > > > > > > Copyright (c) The PHP Group > > > > > > > Zend Engine v4.0.30, Copyright (c) Zend Technologies > > > > > > > with Zend OPcache v8.0.30, Copyright (c), by Zend Technologies > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 2/22/2024 12:31 PM, Eric Broch wrote: > > > > > > > > > > > > > > > > Odd! Everything works fine on my Rocky9/qmt host. > > > > > > > > > > > > > > > > > > > > > > > > What version of php are you running? > > > > > > > > > > > > > > > > > > > > > > > > # php -v > > > > > > > > > > > > > > > > On 2/22/2024 10:21 AM, Gary Bowling wrote: > > > > > > > > > > > > > > > > > > Thanks Eric. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Yep, just to not send a huge logfile. After having everything > > > > > > > > > stopped for two hrs, I started everything and went to the > > > > > > > > > server/admin-toaster and got the screen from below. It looks > > > > > > > > > like a 401 response, which indicates a lack of authentication > > > > > > > > > credentials. And I'm not sure why. Probably something to do > > > > > > > > > with me copying over the admin.pass or admin.htpasswd from my > > > > > > > > > old server. That was part of the migration page. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Here's the httpd/error.log from that. > > > > > > > > > > > > > > > > > > > > > > > > > > > [Thu Feb 22 17:12:23.702465 2024] [suexec:notice] [pid > > > > > > > > > 121153:tid 121153] AH01232: suEXEC mechanism enabled > > > > > > > > > (wrapper: /usr/sbin/suexec) > > > > > > > > > [Thu Feb 22 17:12:23.714703 2024] [so:warn] [pid 121153:tid > > > > > > > > > 121153] AH01574: module proxy_ajp_module is already loaded, > > > > > > > > > skipping > > > > > > > > > [Thu Feb 22 17:12:23.719266 2024] [lbmethod_heartbeat:notice] > > > > > > > > > [pid 121153:tid 121153] AH02282: No slotmem from > > > > > > > > > mod_heartmonitor > > > > > > > > > [Thu Feb 22 17:12:23.722704 2024] [mpm_event:notice] [pid > > > > > > > > > 121153:tid 121153] AH00489: Apache/2.4.57 (Rocky Linux) > > > > > > > > > OpenSSL/3.0.7 configured -- resuming normal operations > > > > > > > > > [Thu Feb 22 17:12:23.722720 2024] [core:notice] [pid > > > > > > > > > 121153:tid 121153] AH00094: Command line: '/usr/sbin/httpd -D > > > > > > > > > FOREGROUND' > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > And here's the httpd/access.log > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 96.46.15.70 - - [22/Feb/2024:17:12:41 +0000] "GET > > > > > > > > > /admin-toaster HTTP/1.1" 401 381 "-" "Mozilla/5.0 (Windows NT > > > > > > > > > 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) > > > > > > > > > Chrome/122. > > > > > > > > > 0.0.0 Safari/537.36" > > > > > > > > > 96.46.15.70 - admin [22/Feb/2024:17:12:41 +0000] "GET > > > > > > > > > /admin-toaster HTTP/1.1" 301 244 "-" "Mozilla/5.0 (Windows NT > > > > > > > > > 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) > > > > > > > > > Chrome/ > > > > > > > > > 122.0.0.0 Safari/537.36" > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 2/22/2024 10:45 AM, Eric Broch wrote: > > > > > > > > > > > > > > > > > > > > Can you check the httpd logs? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 2/22/2024 8:12 AM, Gary Bowling wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Another issue. When I log in to admin-toaster, it > > > > > > > > > > > properly asks for my password and accepts it, but then > > > > > > > > > > > all I get is this screen. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > <AFsYv2kZDDMd60l8.png> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Between the problems I'm having with roundcube and with > > > > > > > > > > > qmailadmin, something is very wrong with my install. I > > > > > > > > > > > don't get any errors in the logs, either in messages or > > > > > > > > > > > httpd logs. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I can configure up a client on my desktop and log into > > > > > > > > > > > the server using IMAP and send/receive email. Granted I'm > > > > > > > > > > > only sending to myself as there is no mx record or proper > > > > > > > > > > > dns for this server as it's not live. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 2/21/2024 9:52 AM, Gary Bowling wrote: > > > > > > > > > > > > > > > > > > > > > > > > My next challenge is to get roundcube working. My old > > > > > > > > > > > > server uses squirrel, but that's so old I need to move > > > > > > > > > > > > on. Which might be a bit of a challenge as I have some > > > > > > > > > > > > users who exclusively use web mail and have all their > > > > > > > > > > > > address books and everything in there. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > At any rate, I first just tried going to my > > > > > > > > > > > > server/email.. I got a big list of errors, etc. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > In poking around a bit, I discovered that there wasn't > > > > > > > > > > > > a /var/lib/roundcube directory, which is listed in the > > > > > > > > > > > > rpm.. Not sure why that was or if it's intended as > > > > > > > > > > > > maybe this is a customized version of roundcube. At any > > > > > > > > > > > > rate, I decided to do a yum reinstall on roundcube, > > > > > > > > > > > > which produced a /var/lib/roundcube dir. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > But I still got the same big list of errors when going > > > > > > > > > > > > to server/email. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > In looking at the roundcube configs in > > > > > > > > > > > > /etc/roundcube/.. I see the config.inc.php has the > > > > > > > > > > > > proper string in it with the p4ssw... password etc. So > > > > > > > > > > > > that looks ok. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Logging into mysql with the roundcube user works, and > > > > > > > > > > > > the roundcube database is there with all the table > > > > > > > > > > > > structure. So that looks ok. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > In looking at the roundcube config in httpd I noticed > > > > > > > > > > > > the "require local" rule, which I think means I can > > > > > > > > > > > > only access it from the local machine. Since my machine > > > > > > > > > > > > is a hosted machine, I can't do that. So I changed the > > > > > > > > > > > > to "require ip <MYIP>" ... that didn't resolve anything. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I'm off to do some other work for the rest of the day, > > > > > > > > > > > > but somehow I need to figure out what's going on here. > > > > > > > > > > > > There is very little in the logs and I'm running out of > > > > > > > > > > > > things to check. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Here's the screen I get when I go to myserver/email, > > > > > > > > > > > > which seems to say "everything is broken" haha.. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > | | Author: Aleksander Machniak | > > > > > > > > > > > > +-------------------------------------------------------------------------+ > > > > > > > > > > > > */ // include environment require_once > > > > > > > > > > > > 'program/include/iniset.php'; // init application, > > > > > > > > > > > > start session, init output class, etc. $RCMAIL = > > > > > > > > > > > > rcmail::get_instance(0, isset($GLOBALS['env']) ? > > > > > > > > > > > > $GLOBALS['env'] : null); // Make the whole PHP output > > > > > > > > > > > > non-cacheable (#1487797) > > > > > > > > > > > > $RCMAIL->output->nocacheing_headers(); > > > > > > > > > > > > $RCMAIL->output->common_headers(!empty($_SESSION['user_id'])); > > > > > > > > > > > > // turn on output buffering ob_start(); // check if > > > > > > > > > > > > config files had errors if ($err_str = > > > > > > > > > > > > $RCMAIL->config->get_error()) { > > > > > > > > > > > > rcmail::raise_error(['code' => 601, 'message' => > > > > > > > > > > > > $err_str], false, true); } // check DB connections and > > > > > > > > > > > > exit on failure if ($err_str = $RCMAIL->db->is_error()) > > > > > > > > > > > > { rcmail::raise_error(['code' => 603, 'type' => 'db', > > > > > > > > > > > > 'message' => $err_str], false, true); } // error steps > > > > > > > > > > > > if ($RCMAIL->action == 'error' && > > > > > > > > > > > > !empty($_GET['_code'])) { rcmail::raise_error(['code' > > > > > > > > > > > > => hexdec($_GET['_code'])], false, true); } // check if > > > > > > > > > > > > https is required (for login) and redirect if necessary > > > > > > > > > > > > if (empty($_SESSION['user_id']) && ($force_https = > > > > > > > > > > > > $RCMAIL->config->get('force_https', false))) { // > > > > > > > > > > > > force_https can be true, , :, if > > > > > > > > > > > > (!is_bool($force_https)) { list($host, $port) = > > > > > > > > > > > > explode(':', $force_https); if (is_numeric($host) && > > > > > > > > > > > > empty($port)) { $port = $host; $host = ''; } } if > > > > > > > > > > > > (empty($port)) { $port = 443; } if > > > > > > > > > > > > (!rcube_utils::https_check($port)) { if (empty($host)) > > > > > > > > > > > > { $host = preg_replace('/:[0-9]+$/', '', > > > > > > > > > > > > $_SERVER['HTTP_HOST']); } if ($port != 443) { $host .= > > > > > > > > > > > > ':' . $port; } header('Location: https://' . $host . > > > > > > > > > > > > $_SERVER['REQUEST_URI']); exit; } } // trigger startup > > > > > > > > > > > > plugin hook $startup = > > > > > > > > > > > > $RCMAIL->plugins->exec_hook('startup', ['task' => > > > > > > > > > > > > $RCMAIL->task, 'action' => $RCMAIL->action]); > > > > > > > > > > > > $RCMAIL->set_task($startup['task']); $RCMAIL->action = > > > > > > > > > > > > $startup['action']; $session_error = null; // try to > > > > > > > > > > > > log in if ($RCMAIL->task == 'login' && $RCMAIL->action > > > > > > > > > > > > == 'login') { $request_valid = > > > > > > > > > > > > !empty($_SESSION['temp']) && $RCMAIL->check_request(); > > > > > > > > > > > > $pass_charset = > > > > > > > > > > > > $RCMAIL->config->get('password_charset', 'UTF-8'); // > > > > > > > > > > > > purge the session in case of new login when a session > > > > > > > > > > > > already exists if ($request_valid) { > > > > > > > > > > > > $RCMAIL->kill_session(); } $auth = > > > > > > > > > > > > $RCMAIL->plugins->exec_hook('authenticate', [ 'host' => > > > > > > > > > > > > $RCMAIL->autoselect_host(), 'user' => > > > > > > > > > > > > trim(rcube_utils::get_input_string('_user', > > > > > > > > > > > > rcube_utils::INPUT_POST)), 'pass' => > > > > > > > > > > > > rcube_utils::get_input_string('_pass', > > > > > > > > > > > > rcube_utils::INPUT_POST, true, $pass_charset), 'valid' > > > > > > > > > > > > => $request_valid, 'error' => null, 'cookiecheck' => > > > > > > > > > > > > true, ]); // Login if ($auth['valid'] && > > > > > > > > > > > > !$auth['abort'] && $RCMAIL->login($auth['user'], > > > > > > > > > > > > $auth['pass'], $auth['host'], $auth['cookiecheck']) ) { > > > > > > > > > > > > // create new session ID, don't destroy the current > > > > > > > > > > > > session // it was destroyed already by > > > > > > > > > > > > $RCMAIL->kill_session() above > > > > > > > > > > > > $RCMAIL->session->remove('temp'); > > > > > > > > > > > > $RCMAIL->session->regenerate_id(false); // send auth > > > > > > > > > > > > cookie if necessary > > > > > > > > > > > > $RCMAIL->session->set_auth_cookie(); // log successful > > > > > > > > > > > > login $RCMAIL->log_login(); // restore original request > > > > > > > > > > > > parameters $query = []; if ($url = > > > > > > > > > > > > rcube_utils::get_input_string('_url', > > > > > > > > > > > > rcube_utils::INPUT_POST)) { parse_str($url, $query); // > > > > > > > > > > > > prevent endless looping on login page if > > > > > > > > > > > > (!empty($query['_task']) && $query['_task'] == 'login') > > > > > > > > > > > > { unset($query['_task']); } // prevent redirect to > > > > > > > > > > > > compose with specified ID (#1488226) if > > > > > > > > > > > > (!empty($query['_action']) && $query['_action'] == > > > > > > > > > > > > 'compose' && !empty($query['_id'])) { $query = > > > > > > > > > > > > ['_action' => 'compose']; } } // allow plugins to > > > > > > > > > > > > control the redirect url after login success $redir = > > > > > > > > > > > > $RCMAIL->plugins->exec_hook('login_after', $query + > > > > > > > > > > > > ['_task' => 'mail']); unset($redir['abort'], > > > > > > > > > > > > $redir['_err']); // send redirect > > > > > > > > > > > > $RCMAIL->output->redirect($redir, 0, true); } else { if > > > > > > > > > > > > (!$auth['valid']) { $error_code = > > > > > > > > > > > > rcmail::ERROR_INVALID_REQUEST; } else { $error_code = > > > > > > > > > > > > is_numeric($auth['error']) ? $auth['error'] : > > > > > > > > > > > > $RCMAIL->login_error(); } $error_labels = [ > > > > > > > > > > > > rcmail::ERROR_STORAGE => 'storageerror', > > > > > > > > > > > > rcmail::ERROR_COOKIES_DISABLED => 'cookiesdisabled', > > > > > > > > > > > > rcmail::ERROR_INVALID_REQUEST => 'invalidrequest', > > > > > > > > > > > > rcmail::ERROR_INVALID_HOST => 'invalidhost', > > > > > > > > > > > > rcmail::ERROR_RATE_LIMIT => 'accountlocked', ]; if > > > > > > > > > > > > (!empty($auth['error']) && !is_numeric($auth['error'])) > > > > > > > > > > > > { $error_message = $auth['error']; } else { > > > > > > > > > > > > $error_message = !empty($error_labels[$error_code]) ? > > > > > > > > > > > > $error_labels[$error_code] : 'loginfailed'; } > > > > > > > > > > > > $RCMAIL->output->show_message($error_message, > > > > > > > > > > > > 'warning'); // log failed login > > > > > > > > > > > > $RCMAIL->log_login($auth['user'], true, $error_code); > > > > > > > > > > > > $RCMAIL->plugins->exec_hook('login_failed', [ 'code' => > > > > > > > > > > > > $error_code, 'host' => $auth['host'], 'user' => > > > > > > > > > > > > $auth['user'], ]); if (!isset($_SESSION['user_id'])) { > > > > > > > > > > > > $RCMAIL->kill_session(); } } } // handle oauth login > > > > > > > > > > > > requests else if ($RCMAIL->task == 'login' && > > > > > > > > > > > > $RCMAIL->action == 'oauth' && > > > > > > > > > > > > $RCMAIL->oauth->is_enabled()) { $oauth_handler = new > > > > > > > > > > > > rcmail_action_login_oauth(); $oauth_handler->run(); } > > > > > > > > > > > > // end session else if ($RCMAIL->task == 'logout' && > > > > > > > > > > > > isset($_SESSION['user_id'])) { > > > > > > > > > > > > $RCMAIL->request_security_check(rcube_utils::INPUT_GET > > > > > > > > > > > > | rcube_utils::INPUT_POST); $userdata = array( 'user' > > > > > > > > > > > > => $_SESSION['username'], 'host' => > > > > > > > > > > > > $_SESSION['storage_host'], 'lang' => > > > > > > > > > > > > $RCMAIL->user->language, ); > > > > > > > > > > > > $RCMAIL->output->show_message('loggedout'); > > > > > > > > > > > > $RCMAIL->logout_actions(); $RCMAIL->kill_session(); > > > > > > > > > > > > $RCMAIL->plugins->exec_hook('logout_after', $userdata); > > > > > > > > > > > > } // check session and auth cookie else if > > > > > > > > > > > > ($RCMAIL->task != 'login' && $_SESSION['user_id']) { if > > > > > > > > > > > > (!$RCMAIL->session->check_auth()) { > > > > > > > > > > > > $RCMAIL->kill_session(); $session_error = > > > > > > > > > > > > 'sessionerror'; } } // not logged in -> show login page > > > > > > > > > > > > if (empty($RCMAIL->user->ID)) { if ( $session_error || > > > > > > > > > > > > (!empty($_REQUEST['_err']) && $_REQUEST['_err'] === > > > > > > > > > > > > 'session') || ($session_error = > > > > > > > > > > > > $RCMAIL->session_error()) ) { > > > > > > > > > > > > $RCMAIL->output->show_message($session_error ?: > > > > > > > > > > > > 'sessionerror', 'error', null, true, -1); } if > > > > > > > > > > > > ($RCMAIL->output->ajax_call || > > > > > > > > > > > > $RCMAIL->output->get_env('framed')) { > > > > > > > > > > > > $RCMAIL->output->command('session_error', > > > > > > > > > > > > $RCMAIL->url(['_err' => 'session'])); > > > > > > > > > > > > $RCMAIL->output->send('iframe'); } // check if > > > > > > > > > > > > installer is still active if > > > > > > > > > > > > ($RCMAIL->config->get('enable_installer') && > > > > > > > > > > > > is_readable('./installer/index.php')) { > > > > > > > > > > > > $RCMAIL->output->add_footer(html::div(['id' => > > > > > > > > > > > > 'login-addon', 'style' => "background:#ef9398; > > > > > > > > > > > > border:2px solid #dc5757; padding:0.5em; margin:2em > > > > > > > > > > > > auto; width:50em"], html::tag('h2', array('style' => > > > > > > > > > > > > "margin-top:0.2em"), "Installer script is still > > > > > > > > > > > > accessible") . html::p(null, "The install script of > > > > > > > > > > > > your Roundcube installation is still stored in its > > > > > > > > > > > > default location!") . html::p(null, "Please remove the > > > > > > > > > > > > whole installer folder from the Roundcube directory > > > > > > > > > > > > because these files may expose sensitive configuration > > > > > > > > > > > > data like server passwords and encryption keys to the > > > > > > > > > > > > public. Make sure you cannot access the installer > > > > > > > > > > > > script (https://mail2.gbco.us/%22./installer//%22) from > > > > > > > > > > > > your browser.") )); } $plugin = > > > > > > > > > > > > $RCMAIL->plugins->exec_hook('unauthenticated', [ 'task' > > > > > > > > > > > > => 'login', 'error' => $session_error, // Return 401 > > > > > > > > > > > > only on failed logins (#7010) 'http_code' => > > > > > > > > > > > > empty($session_error) && !empty($error_message) ? 401 : > > > > > > > > > > > > 200 ]); $RCMAIL->set_task($plugin['task']); if > > > > > > > > > > > > ($plugin['http_code'] == 401) { header('HTTP/1.0 401 > > > > > > > > > > > > Unauthorized'); } > > > > > > > > > > > > $RCMAIL->output->send($plugin['task']); } else { // > > > > > > > > > > > > CSRF prevention $RCMAIL->request_security_check(); // > > > > > > > > > > > > check access to disabled actions $disabled_actions = > > > > > > > > > > > > (array) $RCMAIL->config->get('disabled_actions'); if > > > > > > > > > > > > (in_array($RCMAIL->task . '.' . ($RCMAIL->action ?: > > > > > > > > > > > > 'index'), $disabled_actions)) { > > > > > > > > > > > > rcube::raise_error(['code' => 404, 'message' => "Action > > > > > > > > > > > > disabled"], true, true); } } $RCMAIL->action_handler(); > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 2/20/2024 9:02 PM, Gary Bowling wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Ah, thanks Eric! Unfortunately I didn't find that > > > > > > > > > > > > > page earlier. But but I cobbled together a few sql > > > > > > > > > > > > > queries, so I... > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > - exported each domain to an xml file > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > - then did a bit of scripting on each domains xml > > > > > > > > > > > > > file to add the pw_domain field, which is the same > > > > > > > > > > > > > for every record in each file. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > - then used the "load xml local infile..." sql > > > > > > > > > > > > > command to load each of the files into the vpopmail > > > > > > > > > > > > > table. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > It seems to have all worked. I can now use > > > > > > > > > > > > > ./vuserinfo and get correct entries. The other > > > > > > > > > > > > > tables, valias, lastauth, dir_control, all seem to be > > > > > > > > > > > > > the same. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > So I think I'm on to the next challenge. The script > > > > > > > > > > > > > you showed on that page would have been a little > > > > > > > > > > > > > easier, but no worries, it wasn't to difficult. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Which reminds me, I need to go back and set Global > > > > > > > > > > > > > Local_infiles=0 as I had to change that to > > > > > > > > > > > > > export/import local files. Although I'm not sure that > > > > > > > > > > > > > hurts anything. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks, gb > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 2/20/2024 5:04 PM, Eric Broch wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > did you migrate the database? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Many domain's conversion - QMT (qmailtoaster.org) > > > > > > > > > > > > > > (https://qmailtoaster.org/manydom.html) > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 2/20/2024 9:37 AM, Gary Bowling wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks Eric. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Continuing through the "migration" page. After > > > > > > > > > > > > > > > going through everything moving configs and my > > > > > > > > > > > > > > > database, then restarting. Toaststat says > > > > > > > > > > > > > > > everything is ok. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > So I tried a simple run of > > > > > > > > > > > > > > > ~vpopmail/bin/vuserinfo [email protected] > > > > > > > > > > > > > > > (mailto:[email protected]) just to query an account. I > > > > > > > > > > > > > > > get this error > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > mysql: sql error[3]: Table 'vpopmail.vpopmail' > > > > > > > > > > > > > > > doesn't exist > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Logging into the db and checking, indeed I do not > > > > > > > > > > > > > > > have a vpopmail.vpopmail table. I have all the > > > > > > > > > > > > > > > domain tables, etc. So I went back to my old > > > > > > > > > > > > > > > server (the one this email is coming from) and it > > > > > > > > > > > > > > > also does not have a vpopmail.vpopmail table. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I'm sure it has something to do with how old my > > > > > > > > > > > > > > > existing server is. But how do I resolve this? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks, gb > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 2/20/2024 10:00 AM, Eric Broch wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > It's all good and there's nothing to do. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 2/20/2024 7:11 AM, Gary Bowling wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Another question on my migration. On the > > > > > > > > > > > > > > > > > qmailtoaster.com site, under the RHEL9 > > > > > > > > > > > > > > > > > derivative install heading. There is the > > > > > > > > > > > > > > > > > qmail1.03-3.3.8 header and underneath it is a > > > > > > > > > > > > > > > > > link for "patches applied" > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I'm confused if that means. It implies that > > > > > > > > > > > > > > > > > those patches are already applied and there > > > > > > > > > > > > > > > > > is no need to do them. But the link takes you > > > > > > > > > > > > > > > > > to the page for the patch like it's something > > > > > > > > > > > > > > > > > we should apply. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I'm pretty sure it's all good and there is > > > > > > > > > > > > > > > > > nothing to do, just wanted to make sure. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks, gb > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > > > > > > > > ____________________ > > > > > > > > > > > > > > > > > The Moderns on Spotify > > > > > > > > > > > > > > > > > (https://distrokid.com/hyperfollow/themoderns/bbrs) > > > > > > > > > > > > > > > > > ____________________ > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > > > > > > > > > > To unsubscribe, e-mail: > > > > > > > > > > > > > > > > > [email protected] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (mailto:[email protected]) > > > > > > > > > > > > > > > > > For additional commands, e-mail: > > > > > > > > > > > > > > > > > [email protected] > > > > > > > > > > > > > > > > > (mailto:[email protected]) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > > > > > > > > > > To unsubscribe, e-mail: > > > > > > > > > > > > > > > > > [email protected] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (mailto:[email protected]) > > > > > > > > > > > > > > > > > For additional commands, e-mail: > > > > > > > > > > > > > > > > > [email protected] > > > > > > > > > > > > > > > > > (mailto:[email protected]) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > > > > > > > > > > To unsubscribe, e-mail: > > > > > > > > > > > > > > > > > [email protected] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (mailto:[email protected]) > > > > > > > > > > > > > > > > > For additional commands, e-mail: > > > > > > > > > > > > > > > > > [email protected] > > > > > > > > > > > > > > > > > (mailto:[email protected]) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > > > > > > > > > > To unsubscribe, e-mail: > > > > > > > > > > > > > > > > > [email protected] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (mailto:[email protected]) > > > > > > > > > > > > > > > > > For additional commands, e-mail: > > > > > > > > > > > > > > > > > [email protected] > > > > > > > > > > > > > > > > > (mailto:[email protected]) > > > > > --------------------------------------------------------------------- > > > > > To unsubscribe, e-mail: > > > > > [email protected] > > > > > (mailto:[email protected]) For > > > > > additional commands, e-mail: [email protected] > > > > > (mailto:[email protected]) > > > --------------------------------------------------------------------- To > > > unsubscribe, e-mail: [email protected] > > > (mailto:[email protected]) For additional > > > commands, e-mail: [email protected] > > > (mailto:[email protected])
