Thanks to you all for providing the solutions. I add /usr/ccs/bin to my PATH
and solve the problems. Now I am running the qpopper 3.1 as my pop3 server.
Thanks.
mei-hwa
----- Original Message -----
From: mike miller <[EMAIL PROTECTED]>
Cc: Subscribers of Qpopper <[EMAIL PROTECTED]>
Sent: Tuesday, October 24, 2000 12:55 PM
Subject: Re: Need help on configuring qpopper 3.1 on Solaris 7 Sparcbox.
> You may also want to check that your path is ok to the ar file in
> /usr/ccs/bin if not then you need to add that directory to your path
> type "env" from the shell prompt to see what your path is set to. If
> you dont have /usr/ccs/bin then:
>
> PATH=PATH=/usr/sbin:/usr/bin:/usr/ccs/bin:/usr/local/bin; export PATH
> then you should be ready to go....
>
>
>
> Andy Druda wrote:
> >
> > hmm, that would be SUNWbtool
> >
> > At 01:13 PM 10/24/2000, Andy Druda wrote:
> > >The program ar is not installed on your server. I had the same problem
> > >with my Solaris 8 intel. You need to install the package called
UNWbtool.
> > >On my Sol8 intel disks it was on Software 2/2. I am still working on my
> > >system (more problems still) but at least I got past the "ar is not
> > >present" thing. Hope this helps
> > >
> > >Andy
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >At 12:15 PM 10/24/2000, mei-hwa huang wrote:
> > >>Hi,
> > >> I download the qpopper3.1.tat.gz to my Sun Sparc workstation
running
> > >>Solaris 7. When I try to configure the qpopper by typing ./configure
> > >>command and get the following error messages.
> > >>
> > >>"...
> > >>checking if ar chokes on -r... ./configure: ar : not found
> > >>./configure : ar : not found
> > >>ar fails
> > >>configure: error: ar doesn't work.
> > >>"
> > >>
> > >>And the ./configure program stops. I did not change any configuration
file
> > >>and just would like to quick start.
> > >>What does the error mean? What should I do to solve the problem? Any
> > >>information is very much appreciated.
> > >>
> > >>Mei-hwa
> > >>
> > >>
> > >>
> > >>
> > >>Automation & Robotics Research Institute (ARRI)
> > >>7300 Jack Newell Blvd. S.,
> > >>Fort Worth, TX 76118
> > >>Tel: 817-272-5906 FAX: 817-272-5952
> > >>[EMAIL PROTECTED]
> > >
> > >
> > >
> > >
> > >Andy Druda
> > >Network & Communications Manager
> > >Wagner College
> > >Staten Island, New York 10301
> > >1 718 390 3204
> >
> > Andy Druda
> > Network & Communications Manager
> > Wagner College
> > Staten Island, New York 10301
> > 1 718 390 3204
>
