Hi Tim, thank you for the information.
I have set up Qt Creator on Linux and that works as expected. I guess the next step would have been to debug Qt Creator on Windows, but I gave up on building it from source when some prerequisite wanted me to install the Direct X SDK. Frank -----Original Message----- From: Tim Sander [mailto:[email protected]] Sent: Montag, 6. Oktober 2014 22:40 To: [email protected] Cc: Pilhofer, Frank Subject: Re: [Qt-creator] Crash while Bare-Metal Debugging on Windows Hi Frank Sorry for the late reply... > > I am trying to debug applications running on a TI CC3200 (Cortex-M4) > > device using QT Creator's Bare Metal plugin. I got to the point > > where I can load and debug, however, QT Creator crashes when I > > attempt to interrupt the program or set a breakpoint while the program is > > running. > > Strange. > > > I found the earlier discussion on this list and have checked the > > "use asynchronous mode to control the inferior" option, however this > > makes no difference. > > Yes there is unfortunatly a bug i have get around. > > > In case this is relevant, I see the note "INFERIOR STILL RUNNING IN > > STATE InferiorRunOk" in the debugger log. > > > > This is on Windows 7. The connection to the target is done using a > > Cygwin-built OpenOCD 0.8.0 started separately on the console and > > using a TCP/IP connection to gdb. > > > > Any suggestions? > > Could you open the debugger log window pane and copy attach the gdb > commands and replys. Also it would be interesting which gdb version of > the debugger you are working with. > > You could also try to start a debug session by hand: > gdb binary > target remote 3333 > monitor reset halt > load > c > <ctrl><c> I have not seen anything suspicious in the logs. But i think you haven't set up the debug hardware in your cortex m4. You must switch off the powerdown of the jtag interface in wfi. You can put this in your openocd startup script. See http://nuttx.org/doku.php?id=wiki:howtos:jtag-debugging for some details. Best regards Tim _______________________________________________ Qt-creator mailing list [email protected] http://lists.qt-project.org/mailman/listinfo/qt-creator
