On Sat, Mar 12, 2011 at 4:47 AM, andy fillebrown <[email protected]> wrote: > On Fri, Mar 11, 2011 at 3:16 PM, Daniel Molkentin > <[email protected]> wrote: >> On 3/11/2011 8:18 PM, Daniel Molkentin wrote: >>> On 3/11/2011 4:28 AM, ext andy fillebrown wrote: >>>> On Thu, Mar 10, 2011 at 10:24 PM, andy fillebrown >>>> <[email protected]> wrote: >>>> Here is the log from the TDM MinGW prebuilt binary. I've also tested >>>> with a MinGW-w64 prebuilt binary, but it shows similar output. I'll >>>> send it later if you want. >>>> >>>> Thanks for looking into this. >>>> >>>> Cheers, >>>> ~ andy.f >>>> >>>> Note that the specified gdb startup script contains one line, which is >>>> "b qFatal" -- without the quotes. >>> >>> Looks like the makespec was wrong. it's x64_64_w64_mingw32 instead of >>> x64_64_pc_mingw32. Will look into it next week. >>> On the upside, I just installed TDM-MinGW64 and can test a bit more >>> that way. >>> >> Doesn't work with x64_64_w64_mingw32 either. Will need to investigate >> that more in depth next week. > > I built gdb with --target=i686-w64-mingw32 and I get "Failure to start > application "audiocarver.exe": not in executable format: File format > not recognized." > > Is this what you're getting, too?
I rebuilt gdb with --target=x86_64-w64-mingw32 and I get the original "Don't know how to run" error. I still suspect this is a sjlj/dw2 issue, so I'm going to try building gdb with TDM-MinGW64 linked to Python27-64, to see if it works. Cheers, ~ andy.f _______________________________________________ Qt-creator mailing list [email protected] http://lists.qt.nokia.com/mailman/listinfo/qt-creator
