Rocky, This might be a silly question but sometimes folks ocassionally tend to overlook one or more of the more obvious solutions...
That said: Is there a rehab center or hospital with a decent rehab area near you? They might be willing to work with you to fix it --AND-- if there's a medical need component to it ... like you can't do weight releases, tilt/recline as needed to prevent sores... your doc might be able to get you an Rx to get it adjusted at one of the aformentoned locations. In that case your insurance, Medicare or Medicaid might pay the expense for the rehab assessment and adjustment session. Also, if Vocational Rehab is involved with you at any level, they have an interest in being certain your equipment is properly working or you won't be able complete your vocational training, begin/continue your work, etc., etc,... especially if the problem could result in health issues! Just a few thoughts... I hope they're helpful ones! Best of luck! Tod Santee Tucson ---- "John S." <[email protected]> wrote: > The TDX5 programmer is an expensive tool that you really shouldn't need. Im > sure you would have to buy it out of pocket in Ohio. If you get one it has a > manual so you can figure it out and set up the modes and set the safeties > that you want. It is your call. Is it possible your doctor can prescribe a > better fit and operation of the chair by prescribing a visit between a > wheelchair tech, an OT/PT and eliminate problems you have sitting and > controlling your chair? If your chair doesn't operate in a comfortable mannor > then you obviously need more attention to it. > > I wish you the best, > john > > --- On Sun, 12/14/08, Gary Rock <[email protected]> wrote: > From: Gary Rock <[email protected]> > Subject: [QUAD-L] TDX5 Wheelchair Problems Does Anyone Have Experience? > To: "Quadriplegic" <[email protected]> > Date: Sunday, December 14, 2008, 2:39 PM > > > I am having Problems with my Invacare Storm TDX5 Wheelchair > it is a Sip and Puff recliner. The control box is giving me all kinds of > error messages. It says the joystick needs to be reprogrammed. Has anyone use > those programmers that they sell? Would a member of my family be able to > program it? I live out of range of any service technician they say I would > have to take it in and I have no way of doing it. Any help is appreciated. > Rocky > C5 -- 5 years post

