Yes Loc-Line is very nice for that application! If you're dead set
on flexi-steel try ebay. Ebay will be good for Loc-Line also, but
some may have to be purchased elsewhere.
Jim what brand of ECU are you using?
Craig
On May 22, 2009, at 12:52 PM, Jim Lubin wrote:
You might want to try using Loc-Line instead of the flexable
stainless steel tubings. I replaced the ones I had with Loc-Line
which are more flexible and seem to stay where I position them
better. I use them for my sip and puff wheelchair and adaptive morse
code keyboard/mouse.
I did see one here that has a stainless steel base and Loc-Line.
http://www.quadcontrol.com/sippuffswitch.htm
I use these flex tubes at the end to sip and puff into
http://idsdental.stores.yahoo.net/salivaejectors.html
At 02:14 PM 5/18/2009, Raymond Kelly wrote:
I have a Environmental Control Unit that I activate through a Sip
and Puff. The sip and Puff is mounted on a flexible stainless
steel tubing. The flex is approximately a half inch diameter on
the outside. I am looking for a place where I can purchase a new
piece of it. I have tried looking on the Internet and I just
cannot come up with what I am looking for. I am hoping somebody on
here will know what I am talking about and can point me in the
correct direction to purchase more. I have gone to the website of
the company who makes this ECU and they do not seem to sell it
anymore. I have had this setup since December of 1994. Hopefully
somebody on here will have some idea where to find what I am
looking for.
Raymond
----
Jim Lubin
[email protected]
Home Page: http://makoa.org/jim
disAbility Resources: http://www.makoa.org
