At 5:49 PM -0400 5/1/02, the pickle wrote: >At 12:24 -0700 on 01/05/02, Anthony Vo wrote: > >>I've just acquired SE30 for my mac's collection but it has only BNC port. >>I'd like to hook it up with my other macs via cat-5 hub, do i need to >>replace the network card with cat-5type or there is simpler method? Thanks > >If your hub has a BNC port on it, you can use that. > >If not, you could either buy a hub that does, or replace the Ethernet card >with a 10Base-T one.
Are there any other connectors on the same panel with the BNC? If not you probably have either a video card or, less likely, a 3270 card. If it has a DA-15 connector then it probably is an Ethernet card. You could get an 10BaseT transciever to plug in to the DA-15 (AUI) port. -- Clark Martin Redwood City, CA, USA Macintosh / Internet Consulting [EMAIL PROTECTED] "I'm a designated driver on the Information Super Highway" -- Quadlist is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! | Support Low End Mac <http://lowendmac.com/lists/support.html> Quadlist info: <http://lowendmac.com/lists/quadlist.shtml> The FAQ: <http://macfaq.org/> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/quadlist%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
