Hi I've bee doing several test on quadstor vtl, and had nice perf (close to 100MB/s sometimes) decided to switch to disk backup using quadstor storage, and perf are very low on same hardware (only a couple of MB/s)
using HP servers DL380 g6 / smart array p410 DL380 g8 / smart P420 or P822 sata drives (12x 4TB 5900rpm or 22x 1TB 7200rpm) raid 5 or 6 all accesses or done through 4Gb/s FC once switches to quadstor storage, i can see on the quadstor system in iostat that disk at 100% almost all the time, with between 500KB and sometime up to 7-8MB transfer (but more rare) could it be something related with block size the storage is writing, compared to VTL to make the RAID controler saturating or something likt that? -- You received this message because you are subscribed to the Google Groups "QUADStor Storage Virtualization" group. To unsubscribe from this group and stop receiving emails from it, send an email to quadstor-virt+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.