Diagnostic output sent to support email. I ran the commands, but still unable to list the device fully in the client side. This is the output:
$ ltfs -o list_devices 307 LTFS14000I LTFS starting, LTFS version 2.4.1.2 (10254), log level 2. 307 LTFS14058I LTFS Format Specification version 2.4.0. 307 LTFS14104I Launched by "ltfs -o list_devices". 307 LTFS14105I This binary is built for Mac OS X . 307 LTFS14106I GCC version is 4.2.1 Compatible Apple Clang 4.1 ((tags/Apple/ clang-421.11.66)). 307 LTFS17087I Kernel version: Darwin Kernel Version 18.2.0: Mon Nov 12 20: 24:46 PST 2018; root:xnu-4903.231.4~2/RELEASE_X86_64. 307 LTFS14063I Sync type is "time", Sync time is 300 sec. 307 LTFS17085I Plugin: Loading "iokit" tape backend. 307 LTFS17085I Plugin: Loading "unified" iosched backend. 307 LTFS14095I Set the tape device write-anywhere mode to avoid cartridge ejection. 307 LTFS30810I Opening a device through iokit driver (0). 307 LTFS30814I Vendor ID is IBM . 307 LTFS30815I Product ID is 'ULT3580-TD8 '. 307 LTFS30816I Firmware revision is HB91. 307 LTFS30817I Drive serial is 1761092688. 307 LTFS30808I PRO (0x5f) returns -21719. 307 LTFS30869W The drive is already reserved: unknown host (reserve command) (1761092688) 307 LTFS30868I Retry to reserve from key registration (1761092688) 307 LTFS30808I PRO (0x5f) returns -21719. 307 LTFS30869W The drive is already reserved: unknown host (reserve command) (1761092688) 307 LTFS12024E Cannot reserve device: backend call failed (-21719). 307 LTFS30808I PRO (0x5f) returns -21719. 307 LTFS30869W The drive is already reserved: unknown host (reserve command) (1761092688) 307 LTFS30868I Retry to reserve from key registration (1761092688) 307 LTFS30808I PRO (0x5f) returns -21719. 307 LTFS30869W The drive is already reserved: unknown host (reserve command) (1761092688) 307 LTFS12024E Cannot reserve device: backend call failed (-21719). 307 LTFS30808I PRO (0x5f) returns -21719. 307 LTFS30869W The drive is already reserved: unknown host (reserve command) (1761092688) 307 LTFS30868I Retry to reserve from key registration (1761092688) 307 LTFS30808I PRO (0x5f) returns -21719. 307 LTFS30869W The drive is already reserved: unknown host (reserve command) (1761092688) 307 LTFS12024E Cannot reserve device: backend call failed (-21719). 307 LTFS12014E Cannot open device: failed to reserve the device (-21719). 307 LTFS30808I TEST_UNIT_READY (0x00) returns -21719. 307 LTFS30808I TEST_UNIT_READY (0x00) returns -21719. 307 LTFS30808I TEST_UNIT_READY (0x00) returns -21719. 307 LTFS30808I MODESENSE (0x5a) returns -21719. 307 LTFS30865I MODESENSE returns Drive reservation conflict (-21719) 0. 307 LTFS17154E Cannot set WRITE MODE: Mode Sense for Device Configuration Extension failed (-21719). 307 LTFS30808I MODESENSE (0x5a) returns -21719. 307 LTFS30865I MODESENSE returns Drive reservation conflict (-21719) 0. 307 LTFS10004E Cannot open device '0'. I figured it wouldn't be very helpful to try the mount command and sent the first ste of logs after this command failed to open the drive, but then reconsidered, ran the mount command anyway, and re-sent the logs. Sorry for any confusion that might have created. This is the output of the mount command. $ ltfs /mnt/ltfs -o devname=0 307 LTFS14000I LTFS starting, LTFS version 2.4.1.2 (10254), log level 2. 307 LTFS14058I LTFS Format Specification version 2.4.0. 307 LTFS14104I Launched by "ltfs /mnt/ltfs -o devname=0". 307 LTFS14105I This binary is built for Mac OS X . 307 LTFS14106I GCC version is 4.2.1 Compatible Apple Clang 4.1 ((tags/Apple/ clang-421.11.66)). 307 LTFS17087I Kernel version: Darwin Kernel Version 18.2.0: Mon Nov 12 20: 24:46 PST 2018; root:xnu-4903.231.4~2/RELEASE_X86_64. 307 LTFS14063I Sync type is "time", Sync time is 300 sec. 307 LTFS17085I Plugin: Loading "iokit" tape backend. 307 LTFS17085I Plugin: Loading "unified" iosched backend. 307 LTFS14095I Set the tape device write-anywhere mode to avoid cartridge ejection. 307 LTFS30810I Opening a device through iokit driver (0). 307 LTFS30814I Vendor ID is IBM . 307 LTFS30815I Product ID is 'ULT3580-TD8 '. 307 LTFS30816I Firmware revision is HB91. 307 LTFS30817I Drive serial is 1761092688. 307 LTFS30808I PRO (0x5f) returns -21719. 307 LTFS30869W The drive is already reserved: unknown host (reserve command) (1761092688) 307 LTFS30868I Retry to reserve from key registration (1761092688) 307 LTFS30808I PRO (0x5f) returns -21719. 307 LTFS30869W The drive is already reserved: unknown host (reserve command) (1761092688) 307 LTFS12024E Cannot reserve device: backend call failed (-21719). 307 LTFS30808I PRO (0x5f) returns -21719. 307 LTFS30869W The drive is already reserved: unknown host (reserve command) (1761092688) 307 LTFS30868I Retry to reserve from key registration (1761092688) 307 LTFS30808I PRO (0x5f) returns -21719. 307 LTFS30869W The drive is already reserved: unknown host (reserve command) (1761092688) 307 LTFS12024E Cannot reserve device: backend call failed (-21719). 307 LTFS30808I PRO (0x5f) returns -21719. 307 LTFS30869W The drive is already reserved: unknown host (reserve command) (1761092688) 307 LTFS30868I Retry to reserve from key registration (1761092688) 307 LTFS30808I PRO (0x5f) returns -21719. 307 LTFS30869W The drive is already reserved: unknown host (reserve command) (1761092688) 307 LTFS12024E Cannot reserve device: backend call failed (-21719). 307 LTFS12014E Cannot open device: failed to reserve the device (-21719). 307 LTFS30808I TEST_UNIT_READY (0x00) returns -21719. 307 LTFS30808I TEST_UNIT_READY (0x00) returns -21719. 307 LTFS30808I TEST_UNIT_READY (0x00) returns -21719. 307 LTFS30808I MODESENSE (0x5a) returns -21719. 307 LTFS30865I MODESENSE returns Drive reservation conflict (-21719) 0. 307 LTFS17154E Cannot set WRITE MODE: Mode Sense for Device Configuration Extension failed (-21719). 307 LTFS30808I MODESENSE (0x5a) returns -21719. 307 LTFS30865I MODESENSE returns Drive reservation conflict (-21719) 0. 307 LTFS10004E Cannot open device '0'. Thanks again! This combination is as close as I've gotten in several days of poking to my goal of testing a workload with YoYotta. ~Micah On Tuesday, March 3, 2020 at 5:20:33 AM UTC+13, quadstor wrote: > > Hi, > > Please try the following > On the VTL side > touch /quadstorvtl/etc/quadstor.conf > echo "CmdDebug=1" >> /quadstorvtl/etc/quadstor.conf > > /quadstorvtl/bin/vtconfig --reload > > Then retry the ltfs mount and send us the diagnostic logs to > [email protected] <javascript:> > The diagnostic logs can be got from the HTML GUI -> System Page -> Run > Diagnostics -> Submit > > On Mon, Mar 2, 2020 at 6:22 PM Micah Roth <[email protected] > <javascript:>> wrote: > > > > Hello community, thanks so much for buildling and supporting this great > tool! I'm trying to set up a VTL to test some scenarios in my lab. > > > > Specifically, I'm trying to replicate an environment that must use > YoYotta, a MacOS-only application that uses LTFS. I have QuadStor VTL > running OK in a Ubuntu 18.04 VM. Configured an IBM System Storage TS3100 > with a IBM 3580 Ultrium8 drive and 3580u8L8 vCart. On the MacOS side, I'm > using Daemon Tools to initiate the iSCSI target, IBM SDE 2.4.12 tooling for > LTFS which I downloaded from IBM (registerwall) and the osxfuse provided by > homebrew. I'm following the steps that come with the IBM SDE download: > > > > $ ltfs -o device_list > > > > showed the IBM drive as expected > > > > $ mkltfs -d 0 > > > > formatted the tape with LTFS as expected > > > > $ mkdir /mnt > > $ mkdir /mnt/ltfs > > $ ltfs /mnt/ltfs -o devname=0 > > > > returned a solid block of text and then hung, and I eventually (after > about 30 minutes) just killed the terminal session. Unfortunately I don't > have the error message content, thinking I could replicate it easily. > However I ran into errors trying to list the devices thereafter. I > restarted both the client, and quadstorvtl VM, re-loaded the same vcart, > reconnected to the iSCSI target, and re-ran the device_list command, which > has now hung with these messages. > > > > $ ltfs -o list_devices > > 307 LTFS14000I LTFS starting, LTFS version 2.4.1.2 (10254), log level 2. > > 307 LTFS14058I LTFS Format Specification version 2.4.0. > > 307 LTFS14104I Launched by "ltfs -o list_devices". > > 307 LTFS14105I This binary is built for Mac OS X . > > 307 LTFS14106I GCC version is 4.2.1 Compatible Apple Clang 4.1 > ((tags/Apple/clang-421.11.66)). > > 307 LTFS17087I Kernel version: Darwin Kernel Version 18.2.0: Mon Nov 12 > 20:24:46 PST 2018; root:xnu-4903.231.4~2/RELEASE_X86_64. > > 307 LTFS14063I Sync type is "time", Sync time is 300 sec. > > 307 LTFS17085I Plugin: Loading "iokit" tape backend. > > 307 LTFS17085I Plugin: Loading "unified" iosched backend. > > 307 LTFS14095I Set the tape device write-anywhere mode to avoid > cartridge ejection. > > 307 LTFS30810I Opening a device through iokit driver (0). > > 307 LTFS30814I Vendor ID is IBM . > > 307 LTFS30815I Product ID is 'ULT3580-TD8 '. > > 307 LTFS30816I Firmware revision is HB91. > > 307 LTFS30817I Drive serial is 1761092688. > > 307 LTFS17160I Maximum device block size is 1048576. > > 307 LTFS11330I Loading cartridge. > > 307 LTFS30854I Logical block protection is disabled. > > 307 LTFS11332I Load successful. > > 307 LTFS17157I Changing the drive setting to write-anywhere mode. > > 307 LTFS11005I Mounting the volume. > > 307 LTFS30854I Logical block protection is disabled. > > 307 LTFS30803I Failed to execute CDB, The opcode = 91 (-536870187). > > 307 LTFS30808I SPACE (0x91) returns -21700. > > 307 LTFS30866E SPACE returns msg = NULL (-21700) 0. > > 307 LTFS12041E Cannot space file marks: backend call failed (-21700). > > 307 LTFS17040E XML parser: failed to space back 1 file mark. > > Entity: line 1: parser error : Extra content at the end of the document > > > > > > ^ > > 307 LTFS17037E XML parser: failed to read from XML stream. > > 307 LTFS17016E Cannot parse index direct from medium. > > 307 LTFS11194W Cannot read index: failed to read and parse XML data > (-1014). > > 307 LTFS11024E Cannot mount volume: read index failed on the index > partition. > > 307 LTFS14013E Cannot mount the volume. > > 307 LTFS30803I Failed to execute CDB, The opcode = 1e (-536870187). > > 307 LTFS30808I PREVENT/ALLOW_MEDIUM_REMOVAL (0x1e) returns -21700. > > 307 LTFS30866E PREVENT/ALLOW_MEDIUM_REMOVAL returns msg = NULL (-21700) > 0. > > 307 LTFS30803I Failed to execute CDB, The opcode = 00 (-536870187). > > 307 LTFS30808I TEST_UNIT_READY (0x00) returns -21700. > > 307 LTFS30803I Failed to execute CDB, The opcode = 00 (-536870187). > > 307 LTFS30808I TEST_UNIT_READY (0x00) returns -21700. > > 307 LTFS30803I Failed to execute CDB, The opcode = 00 (-536870187). > > 307 LTFS30808I TEST_UNIT_READY (0x00) returns -21700. > > 307 LTFS30803I Failed to execute CDB, The opcode = 5a (-536870187). > > 307 LTFS30808I MODESENSE (0x5a) returns -21700. > > 307 LTFS30866E MODESENSE returns msg = NULL (-21700) 0. > > 307 LTFS17154E Cannot set WRITE MODE: Mode Sense for Device > Configuration Extension failed (-21700). > > 307 LTFS30803I Failed to execute CDB, The opcode = 5f (-536870187). > > 307 LTFS30808I PRO (0x5f) returns -21700. > > 307 LTFS30866E PRO returns msg = NULL (-21700) 0. > > 307 LTFS30803I Failed to execute CDB, The opcode = 5a (-536870187). > > 307 LTFS30808I MODESENSE (0x5a) returns -21700. > > 307 LTFS30866E MODESENSE returns msg = NULL (-21700) 0. > > 307 LTFS30803I Failed to execute CDB, The opcode = 5f (-536870187). > > 307 LTFS30808I PRO (0x5f) returns -21700. > > 307 LTFS30866E PRO returns msg = NULL (-21700) 0. > > > > Hoping that some of this makes sense to someone and I can get some > advice on how to get back to my original error, to get help on that. Right > now I can't even list devices. > > > > Kind thanks. > > > > -- > > You received this message because you are subscribed to the Google > Groups "QUADStor VTL" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected] <javascript:>. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/quadstor-vtl/eaa46825-3be8-4e93-96e3-a3d6baf88bf6%40googlegroups.com. > > > > > > -- > Virtual Tape Library (VTL) > https://www.quadstor.com/virtual-tape-library.html > VTL software download > https://www.quadstor.com/vtl-extended-edition-downloads.html > VTL documentation https://www.quadstor.com/vtl-documentation.html > -- You received this message because you are subscribed to the Google Groups "QUADStor VTL" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/quadstor-vtl/6ad35b46-15de-434a-ac62-67d148349177%40googlegroups.com.
