Jan/Donnie - My assumption is, is that I have a wrong branch that I forward ported to 1.0. What branch should be used?
donald On Tue, May 24, 2016 at 7:32 AM, <majid.taleq...@yahoo.com> wrote: > Hi > i have downloaded Quagga with EIGRP Support from > https://github.com/donaldsharp/quagga/tree/EIGRP-Development. > i have configured the following configuration to quagga : > { > interface enp0s8 > ip address 192.168.56.102/24 > link-detect > > router eigrp 100 > network 192.168.56.0/24 > } > and it is saved to running configuration. but when i type "show ip eigrp > interface" it does not list my enp0s8 interface as an EIGRP enabled > Interface and as a result it does not send Hello packet out that interface > and finally can not make a neighborship with other routers. > > > *the point is : EIGRP is not enabled in enp0s8 interface although i have > configured the network command. * > Thanks very much > > > _______________________________________________ > Quagga-users mailing list > quagga-us...@lists.quagga.net > https://lists.quagga.net/mailman/listinfo/quagga-users > >
_______________________________________________ Quagga-dev mailing list Quagga-dev@lists.quagga.net https://lists.quagga.net/mailman/listinfo/quagga-dev
