Hi
starting a new thread as mine was hijacked. As Jim suggested, I got
the following info from the previous owner yesterday - confirming that
the track rod end fitment was non-standard

 "hi steve
hub track arms have been reamered out to put taper in from
top .builder did it i cannt remenber why - better geometry/lock.so if
you change back you must change both sides"

So I had been chasing the proverbial red herring. I'm now changing
both stub axles over to standard MKII and fitting new track rod ends.
Interestingly, the tracking seems to require the track rod ends
tightened up to their max, i.e. no further adjustment available (and
I've not yet had it checked professonally). I wonder if this is part
of the reason the builder modified the steering.
Does the 2+2 track differ from the MKII fiesta donor?

Cheers
Steve

--~--~---------~--~----~------------~-------~--~----~
  You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
-~----------~----~----~----~------~----~------~--~---

Reply via email to