Mike,
As far as I'm aware, the crank position sensor operates from the back of the flywheel, which is bolted straight to the crank. The relative positions of the flywheel and the crank sensor shouldn't be affected by presence/absence of the metal gasket. However, you should check the alignment of the starter motor and ring-gear teeth - I'm using an MT75 box rather than T9, but I needed to machine up a spacer plate for mounting the starter. (I carved up another starter to do this). With the metal gasket omitted, the starter spacer would be a different thickness. If you can get a gasket, it would help a lot to keep all sorts of crud out of your clutch and ring gear. I'd recommend fitting one. Hope this helps. TonyV. In message <[EMAIL PROTECTED]>, MIke walton <[EMAIL PROTECTED]> writes > >Hi guys >Can anybody tell me if you have to put the metal gasket between the >type 9 gearbox and engine block of a 2 litre zetec and if you do will >this afect the crank position sensor to operate? any advicethankfully >recieved >Mike -- Tony Vincent --- avast! Antivirus: Outbound message clean. Virus Database (VPS): 080916-0, 16/09/2008 Tested on: 16/09/2008 21:51:43 avast! - copyright (c) 1988-2008 ALWIL Software. http://www.avast.com --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
