Stuart,

Before I read all the other responses to this question, my response was wiring! 
 

Just to add to what the others have already said, the first thing to check is 
that all the earths are properly grounded, both on the engine and body work 
pertaining to the engine loom.  

DO you have a fault ready for this vehicle?  It might give you a clue as to 
where to start?  It may be that the garage that undertook your repair did just 
that and quite reasonably came up with the crank sensor (whose loss instantly 
kills the engine whilst the loss of most other sensors will affect the mixture 
setting rather than actually prevent the engine from running).

I would pay particular attention to the wiring for the crank sensor and the 
passage of the wiring from the engine to the vehicle - I had the door wiring 
fracture on my H4, which then "spiked" the ECU when the wires brushed together 
and permanently turned on one injector.  I was lucky a) to find it almost 
immediately as the electric mirrors also stopped working and b) a hard reset 
(battery off) sorted out the ECU.  When I took apart the wiring loom from the 
donor car for my Beauford, I was appalled at the standard of joining wires 
within the loom and some of the insulation.  I can only hope that a good pair 
of eyes plus a multi meter will solve your problem.

Hamish
  ----- Original Message ----- 
  From: [EMAIL PROTECTED] 
  To: Quantum Owners Group 
  Sent: Wednesday, October 01, 2008 7:54 AM
  Subject: [Quantum Owners] OT: Renault Megane cutting out




  Hello,
  Been having this problem for a while on my wifes car.
  Its a 1.6e megane coupe.
  When driving at motorway speeds the rev counter will start to
  fluctuate slightly.  Next the revs will move from 3k to 4k with the
  cars speed changing too.  Next the revs will drop instantly to zero
  then back up, at this point its like you are depressing the clutch and
  then quickly releasing it as the car jumps forward back into life.
  Finally the revs will drop to zero again but no matter how far you
  press the accelerator the revs wont increase.  Sometime the car will
  cut out at this point sometimes not.  When it does cut out it might
  start or might not.
  Previously these little episodes might have happened once or twice a
  year however the car is now undrivable and was towed back from j9 of
  the M6 the other day.
  Anybody got any ideas?
  Finally the RAC approved garage it was towed to in Walsall said they
  had fixed it by replacing the crank sensor so we paid £112 for the
  parts and labour only to get 5 minutes down the road and the car
  started to behave exactly the same.  How can we get our mony back?
  Thanks
  Stuart
  --~--~---------~--~----~------------~-------~--~----~
    You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
  To post to this group, send email to [email protected]
  To unsubscribe from this group, send email to [EMAIL PROTECTED]
  For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

  IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
  -~----------~----~----~----~------~----~------~--~---




------------------------------------------------------------------------------



  No virus found in this incoming message.
  Checked by AVG - http://www.avg.com 
  Version: 8.0.173 / Virus Database: 270.7.5/1698 - Release Date: 29/09/2008 
19:25
No virus found in this outgoing message.
Checked by AVG - http://www.avg.com
Version: 8.0.173 / Virus Database: 270.7.5/1698 - Release Date: 29/09/2008 19:25

Reply via email to