I've had a play with the old cable. When it's straight, it's fine. When it's got a one-eighty bend in it it's taking lessons from Charles Atlas... and that's without any sort of load on the far end. I'll try a proper ford part tomorrow and try and route to avoid any heat sources. Tricky though, the connection from the carb points straight out over the cam cover and sooner or later it's going to get to the hot bits...
For amusement, here's some ford precision engineering: http://s156.photobucket.com/albums/t31/nailed_barnacle/?action=view¤t=Pb230153s.jpg That bent against the internal friction in the old cable. Neil --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
