I have a problem with my flaps and wonder whether someone else has had a similar fault.
The flaps were becoming slow in operation - I believe they needed adjustment and I hadn't got round to checking them. Then they stopped working; luckily open!. I have checked and adjusted the linkage and they'll now open OK on the light switch but will not close when the switch is off. However, if I put a live feed from the battery to the closing terminal on the flap motor, thy will close fine. So, does that mean I've burnt out the part of the relay which closes the flaps or....... Any ideas? Thanks. Merry Christmas and Happy New Year to you all Kelvin Chambers Q2-341 --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---