Yes that's the one, its on the right hand side when looking at the engine - same side of the bay as the filter.
I will take a look at the fuel pipes asap - I suspect there new. Thanks for the tip on the Ford fuel pipes, I will use them, don't want any mishaps there! Steve On 23 Mar, 08:53, Jim Hearne <[email protected]> wrote: > When you say fuel pressure regulator do you mean the one on the fuel rail ? > If they have used the donor Ford metal fuel pipes then one should have a > red stripe on the end and the other a white stripe, Red is the return > (easy to remember, both start with R) and white is the feed. > If they aren't marked then you will need to find out which is which at > the tank end, or carefully power up the pump and see which pipe the fuel > comes out. > > After that it's easy, the feed pipe from the tank goes to the inlet of > the fuel filter (it is directional), then out of the filter to the far > (cam belt) end of the fuel rail. The other pipe comes from the fuel > pressure regulator (on the end of the fuel rail normally) and goes to > the return fuel pipe back to the tank. > > You should really be using the Ford Nylon high pressure fuel hose with > push on fittings in the engine bay but you can get away with using 8mm > fuel hose as long as it's rated for unleaded and fuel injection, a lot > of fuel hose is still for carbs only. > > Jim > > > > newbie wrote: > > Hi, > > could anyone help with the routing of the fuel lines in the engine bay > > for a 1600 cvh xr2i (H4) > > > My unfinished project, has two metal fuel lines in the engine bay, > > both of which rise up to the level of the fuel presure regulator - one > > has a yellow cap on the end. > > > There is also a plastic fuel line on the offside, coming from the > > injectors. > > > On the nearside inner wing there is the fuel filter. > > > My problem is fairly simple - what connects to what! > > > If someone could send me some pictures showing what connects to what, > > it would help a great deal. > > > I have tried searching the internet, with no luck the pictures I have > > found are not clear enough to be of any help. > > > Steve- Hide quoted text - > > - Show quoted text - --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
