On 29 Mar, 15:42, Stuart Carvell <[email protected]> wrote:
> Hello,
>
> Bought a drivers seatbelt to replace mine as it kept sticking. I have just
> stripped the whole rear tub to find out that quantum in their wisdom fitted
> the drivers seatbelt to the passenger side and the passengers one to the
> drivers side. Nice, looks like i will need to buy a passenger one too!
>
> Anyway i can't get a torx on either lower seatbelt assembly bolt as there
> isn't enough room, my rachet is catching on the gas ram. The torx i have is
> pre-fitted into a socket. How have people fitted or removed their seatbelts
> i'm abit stuck? I'm not to confident about removing the gas ram is this part
> of the problem?
I've got a Torx set that's one of the "bit that fits into the socket
that goes onto the ratchet" types. I can remember that it's very
tight to fit the bit in place but can't remember how I did it - it
might have been with the ratchet, but I might also have used a spanner
on the Torx bit. Generally if I had big problems with a job then I
remember them well!
The gas ram is easily removed - just ease the metal clip out and it
will pop off. In the case one of the gas rams on my H4, it happily
does that with the top mount on its own every time I lower the roof at
the moment. Time for a new one I think....
Pete
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners
Club nor the individuals associated with the Quantum Owners Club or in the
preparation of the above information shall have any liability to any person or
entity with respect to liability, loss, or damage caused or alleged to be
caused directly or indirectly by the instructions contained within this or
related message(s).
-~----------~----~----~----~------~----~------~--~---
