The 3.92 is from the 2.0 xr4x4i. The more common lsds are 3.62 and the rare ones are 3.38.
Mine is a hybrib put together by a Sierra oval racer and has had the 3.92 crown/pinion added later. The guy had previously run a welded diff and a larger outside wheel!!! He tried the LSD and didn't get on with it so sold it on. As you say the LSD can be bolted into to any sierra diff. You just need the right set of output flanges to match as the LSD ones are different. H4x4 sounds interesting... Ian On Apr 20, 9:00 am, Jim Hearne <[email protected]> wrote: > Slightly off topic, which Sierras had LSD's ? > You mentioned 3.92 lsd but i presume the ring gear is bolted to the diff ? > > From looking at the Ford parts catalogue i've noticed the the rear diff > on the Mondeo 4x4 drivetrain is the same part as some Sierras so am > thinking of fitting a rear LSD to the H4x4 project. > > Jim > > IanH (S3-023) wrote: > > Well my back axle replacement project is coming along. > > > Previously I had obtained the 3.92 lsd, the driveshafts and stub > > axles, and from the Q boys at Detling a new set of driveshaft boots. > > > Over the last two weekends I have been turning grotty 15 year old > > grease full of scrap yard grit into nice shiny examples. > > > Starting with this: > >http://picasaweb.google.co.uk/lh/photo/-Nwbc_e98_u7S3tGO8U6Eg?feat=di... > > > Going through this stage: > >http://picasaweb.google.co.uk/lh/photo/30gIqpMshLE9prNhWzmXww?feat=di... > > > And ending up with this: > >http://picasaweb.google.co.uk/lh/photo/XDaPzH_daBohBy6AQ-FkLw?feat=di... > > > I managed to mess up one cv by losing the relative position of the > > inner, the cage, the outer and the bearings - d'oh! So I have replaced > > one joint, but the others have come up nicely and when I have obtianed > > the set of repalcement driveshaft bolts I will be ready to strip out > > the old 3.6 open back end and replace it all... > > > 3.92 lsd backend: > >http://picasaweb.google.co.uk/lh/photo/GMrdjuFmi1krWz5dOfJuNg?feat=di... --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
