Thanks for the picture, that should be useful. It did also fail on the upper mounts, as you say they need spacing to get to 450mm above the seat reference point. The problem the tester had was with the outer mounts into the chassis, as he said he couldnt see them he wanted confirmation that they were strong enough. The inner mounts were fine, no mention was made of those, though they all had spreader plates on, we even made our own for the seat mounts which were bigger than the Quantum supplied ones.
Thanks for the help! --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
