They sound like mk3 ones. You can buy them rather than replace the whole arm.I think the same joint is used on a few other later models Iirc mk1 fiesta had a greater angle on the body than the mk2 type and the mk3 ones are straight(near as) Darren -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Phillip Harris Sent: 15 May 2009 20:39 To: [email protected] Subject: [Quantum Owners] Lower Ball Joint I bought a pair of lower ball joints for a 2+2 the pin than fits into the hub is larger than the mk2 xr2 ball joints, can anyone tell me what fiesta they will fit. Philip Harris
No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.329 / Virus Database: 270.12.32/2117 - Release Date: 05/15/09 17:55:00 --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
