In message <716905496.61763.1245852899615.javamail.m...@webmail06>, Tom Walker <[email protected]> writes >Hi All, > >I'm having some brackets made up to allow Granada/Sierra rear disk >calipers to be attached to the Fiesta hubs (as per the Fiesta-Centre kit). If >I only get a couple made they are about 70 quid each - however this goes >down to 30 each for 10 (5 pairs). > >So... would any of you kids be interested in clubbing together to get a few >at the lower price? The logic being that the FC kit cost 250 plus delivery, >and essentially just consists of these brackets plus some machined hubs. For >me, if I can get the brackets for £60 it's more wife-friendly. > >Tom
Hi Tom I'd be interested, particularly if you can get the price down any more by shopping around. I've never liked the fact that you have to disturb the rear wheel bearings to check the rear brakes on the saloon. What other parts are required - just the Granada calipers (and discs?) ? -- Tony Vincent --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
