hi,
Just trying to keep overall heat down in the engine bay and the
oil as clean as possible, also want everything to last as long as it
can because im tight.
On Jun 29, 1:35 pm, Steve Kodz <[email protected]> wrote:
> Arnie,
>
> What are you trying to achieve with the oil cooler?
>
> I fitted one to my H4 to help with the over all cooling, and found it was
> the best mod to assist with cooling. Having said that the FRST engine
> comes with a water cooled sandwich plate between the block and oil filter,
> which probably helped to raise the water temperature. If you have this
> arrangement it's worth fitting, otherwise unless you do a lot of track
> work, it probably isn't very necessary, especially if you're using a high
> quality fully synthetic oil - these can survive very high temperature
> (Shell told me over 150C for their product).
>
> Regards,
> Steve
>
> On Monday 29 Jun 2009, Arn1905 wrote:
>
> > Im thinking of fitting a decent oil cooler and though i might aswell
> > fit an oil catch tank but am unsure if it will be worth it.
>
> > If i can find the space will it be worth fitting one?
>
> > Arnie
>
> --www.h4-turbo.co.uk
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners
Club nor the individuals associated with the Quantum Owners Club or in the
preparation of the above information shall have any liability to any person or
entity with respect to liability, loss, or damage caused or alleged to be
caused directly or indirectly by the instructions contained within this or
related message(s).
-~----------~----~----~----~------~----~------~--~---
