Rob you may have to wait a bit for my assistance but sure I can helpif you can get down to Plymouth after sept. (Baby due) 1 lug is ground right off (I think the one nearest the front). eg not used. the other lug is shortened flush to the sorounding plate. add a threaded bar or screw with the head cut off. used as a locator to stop rotation. the third is shortened i think and a bolt fitted from inside the door. it was a blinking tight squeese and fiberglass shreaded hands to get it in. I suggest drilling right through the inner panel to gain access. - or continue to struggle. it is a sod. you will need to drill a fourth hole for the cable.
Regards Gary robert greig wrote: > Hello everyone. > > I heed some help. > I have spent the last six hours trying to fit the mirrors I have for the H4. > > I have taken of the near side mirror OK. > Made a template and drilled the fixing holes. > > Despite checking before drilling, the holes did not quite line up, so made > them bigger. > > BUT As hard as I try I still can't get the mirrors fitted. > There is hardly any room get to bolts/ nuts from inside the door. > > ........................ > > Is anyone willing to fit these for me? > > I am fed-up not being able to do what should be simple jobs. > > A very frustrated Robert greig.. > > > > > > > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
