Assuming you mean the cast aluminium zetec inlet manifold and it's the
black rubber pipe that projects out to the right from the bottom of
the I in EFI (cast into the top of the manifold) that then connects
down to the end of the fuel rail..... It's the inlet manifold pressure/
vacuum pipe that connects to the fuel pressure regulator to control
the fuel pressure.


> Stuart Carvell wrote:
> > I have a split rubber pipe on the inlet manifold.  Its the bottom one
> > that comes off at the bottom of the i in efi, what does it do? Its a
> > 2.0 zetec.
> > Thanks
> > Stuart
>
> > ------------------------------------------------------------------------
> > New! Receive and respond to mail from other email accounts from within
> > Hotmail Find out how. <http://clk.atdmt.com/UKM/go/167688463/direct/01/>
--~--~---------~--~----~------------~-------~--~----~
  You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
-~----------~----~----~----~------~----~------~--~---

Reply via email to