I haven't heard about any cycle arch bracket failures recently, so I thought 
I'd report my near failure - I spotted a lot of movement on the drivers 
side and have caught it before a complete failure.

At the weekend I have a pair of Yokohama Parada 2 tyres fitted to the front 
on Saturday, which have larger (wider) rim protection, meaning the cycle 
arches needed to be spaced out a bit more to clear the tyre.  I initially 
used washers between the bracket and the hub, which could well have 
contributed to the failure, as there wasn't the same contact area.  There 
was a lot of flex around the middle mount, which is where the crack is - 
I'm not sure if the crack was existing and has just been made worse, but I 
have been keeping an eye out.

http://www.h4-turbo.co.uk/img/p9090069.jpg
http://www.h4-turbo.co.uk/img/p9090071.jpg
http://www.h4-turbo.co.uk/img/p9090072.jpg
http://www.h4-turbo.co.uk/img/p9090073.jpg
http://www.h4-turbo.co.uk/img/p9090074.jpg

I'm planning to run a weld down the crack and then make up a spacer from 4mm 
steel, to increase the contact area.  I'll also do the same on the near 
side and check that for cracks when I take it off.

Regards,
Steve
-- 
www.h4-turbo.co.uk

--~--~---------~--~----~------------~-------~--~----~
  You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
-~----------~----~----~----~------~----~------~--~---

Reply via email to