On 16/09/2009 22:03:56, Arn1905 ([email protected]) wrote: > Distributorless. > > Cps all connected up, power to the coil but no spark. Although the Ht > leads do not feel that great of a fit, so i will pay closer attention > to those. > > Narrowed it down to either a faulty coil pack or edis unit. > > "If ECU is powered then look for the tacho needle jumping alittle > during cranking. If yes, then coil pack has failed" > > The rev counter moves slightly which lead me to believe that the coil > pack is nackerd, ive tried two seperate used ones so will probably > need to get a new one.
Have you checked that you've got a good earth between the body of the coilpack and the engine? It might also be worth checking if you get a spark by disconnecting the coilpack-EDIS connector and "jump starting" the coil pack using wires straight from the battery (they'll only spark when you make/break the circuit). This would eliminate the EDIS/cps as being the problem. -- Tony Vincent --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
