Steve,
    I have finaly finished the installation of the towbar on the saloon. 
I ordered a towbar for a MK2 Fiesta, but it didn't look much like the 
pictures you sent. Anyway out with the grinder and the welder and it is 
complete. I also added some extra bits onto the side of the part that 
goes up into the axle well to spread the load and reinforced all 
mounting area with more fibreglass and Kevlar, so hopefully it will be OK.

   Thanks for your pictures they were a great help. Now I am wondering 
if I am going to have to uprate the rear suspension a bit to cope with 
towing.

Russell

Steve Brabazon wrote:
> Hi Russell,
>
> The towbar is from a Mk 2 Fiesta and if you look at this link:
>
> http://i36.tinypic.com/23sug3t.jpg
>
> you will be able to see what needs to be welded onto it
>
> The new part is a square tube with about the same external dimensions
> as the towbar. A bolt goes through the bit that extends upwards and
> bolts horizontally into the boot.
>
> Steve
>
> >
>   
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.5.409 / Virus Database: 270.13.113/2398 - Release Date: 09/27/09 
> 05:51:00
>
>   



--~--~---------~--~----~------------~-------~--~----~
  You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
-~----------~----~----~----~------~----~------~--~---

Reply via email to