nice one guys, the quantum I got was on ebay but only for a day as I snapped his arm off for the chance to get it, ill see if I can link a few pics.
[IMG]http://i120.photobucket.com/albums/o192/jindal/BqNhwbB2kKGrHqIH- EQEuiHUlMBLuz7JUNP.jpg[/IMG] [IMG]http://i120.photobucket.com/albums/o192/jindal/BqNhWBgmkKGrHqQH- CYEuIs1KZ6BLuz5cRv.jpg[/IMG] [IMG]http://i120.photobucket.com/albums/o192/jindal/BqNij7wWkKGrHqYH- EYEuIBc6wYBLuz-qDm.jpg[/IMG] [IMG]http://i120.photobucket.com/albums/o192/jindal/BqNkcwBGkKGrHqUH- C0EuZZZiR8QBLu0GlU.jpg[/IMG] it really is very tidy and in the colour id been looking for, the bodywork is spot on with only the odd scuff here and there but nothing I cant sort, the only thing that lets it down is the trim seals all look tatty and could do with being replaced but all in good time thankyou Jim for the tip on closing the bonnet, seems so simple cant think why I didn't think of it, all good now and no lasting damage (I hope) ive worked out how to modify the seat runners, the front right angle overhang on the actual runners is only riveted on so I can remove that and bolt the runners further back to 2 6mm thick x 60mm wide steel plates ive made and bent to the right angle to bolt to the floor with the original bolt holes, then ill bolt the runners to the plates and all should be ok, as for the seatbelt I did work it out in the end and managed to get the reel out, but was surprised to see it bolted to the panel where the speaker is rather than the panel just the other side of the door jamb, with it being bolted right next to the speaker it twists the belt through 90 degrees and it seems to work better held up to the other side behind the drivers seat, I think its rough anyway so ill look out for more, just need a carpet now to replace this one that smells of old dog, does the carpet from Quantum come pre cut or do you need templates or something like that? as always I appreciate all your help cheers jin -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). To unsubscribe, reply using "remove me" as the subject.
