Sorry, that link was missing a -
http://www.quantums.info/pictures/fiesta/tank-1-768.jpg
Jim
On 28/05/2010 15:58, hansdefauwes wrote:
Hi,
the link
http://www.quantums.info/pictures/fiesta/tank1-768.jpg
This is a picture of a Ford swirl pot from a MFI (not EFI) Mk4 Escort
petrol tank fitted into the Fiesta tank.
gives an error - 404 file or directory not found -
Hans
----- Original Message ----- From: "barnacle" <[email protected]>
To: "Quantum Owners Group" <>
Sent: Thursday, May 27, 2010 9:30 PM
Subject: [Quantum Owners] Re: Fuel tanks - again the mournful cry!
Thanks, Jim. I'll make a call to Heritage and see if there's is a Ford
or pattern part. It's twice the price of the Hadrian part... if it's
pattern, I'll probably stick with the Hadrian (eighty quid) and stick
a pump on and see how it goes. If there's an issue at part-full, I'll
stick in a swirl pot and second pump. Or grab the mk4 tank and rip it
up. Memo to brain; keep the old tank.
Going to cost me an arm and a leg anyway; the odd hundred quid saving
helps no end!
Neil
On 27 May, 08:33, Jim Hearne <[email protected]> wrote:
http://www.quantums.info/pictures/fiesta/tank-3-768.jpg
This is the swirl pot in a pattern tank from the Fiesta centre a few
years back.
These suffer from fuel starvation when the tank is below one half full
to one quarter full (depends how fast you are cornering).
The return from the engine just goes into the pot and it relies on
petrol flowing into the pot via the various holes but it can never be
higher than the fuel level in the rest of the tank.
But when you go round corners it all sloshes over the top.
http://www.quantums.info/pictures/fiesta/tank-2-768.jpg
This is a Ford swirl pot, as you can see it's somewhat more complicated.
It uses a venturi effect on the fuel returning from the engine to suck
more more fuel in from the tank (even if theres only 1" in it) and keep
the swirl pot full.
It's also a lot higher !
http://www.quantums.info/pictures/fiesta/tank1-768.jpg
This is a picture of a Ford swirl pot from a MFI (not EFI) Mk4 Escort
petrol tank fitted into the Fiesta tank.
Ford made Mk2 Fiestas with fuel injection and therefore an injection
tank but it was only sold in Europe and has never been easily available
from UK Ford dealers.
Old Quantum (Stourbridge) managed to get a stock of them and i've one in
my 2+2.
But on my other Quantums with fuel injection i've either fitted the
swirl pot from a XR3I into a Fiesta tank or used an external swirl pot
and 2 fuel pumps.
If you modify fuel tanks remember never weld one that has had fuel in
it, even after months of being empty they can still exploded.
Jim
On 26/05/2010 22:23, barnacle wrote:
> Those would be the tank-x-768 series of pictures? Hmm, I'd seen those
> before but was unclear what was which.
> Is the Ford part still available?
> Neil
> On 26 May, 21:41, Jim Hearne<[email protected]> wrote:
>> They will all be pattern parts and the quality of the swirl pot
may be
>> very variable.
>> Look at the difference between the Ford ones and the pattern ones
on my
>> web site.
>> Jim
>> On 26/05/2010 21:19, barnacle wrote:
>>> Prior to swapping in the Fiat Coupe engine in a month or so, I
want to
>>> get a suitable fuel tank for the 2+2.
>>> Can any of you knowledgeable lot confirm for me that the correct
tank
>>> for an injection engine is the Hadrian #382 - as far as I can tell,
>>> though the drawings are a bit grim, that has both a supply and a
>>> return and a swirl pot built in?
>>>http://autopanels-castleford.co.uk/webpages/Ford/ford%20fiesta%20mk2.htm
>>>http://hadrian.dominohosting.biz/hadrian/hcpdb01.nsf/PartNoDocID%2FAD...
>>> And is the same part available from Quantum Heritage
>>>http://www.quantumheritage.co.uk/products/fuel/?page=5(Part# J403)?
>>> I'm keen to avoid an external swirl pot if I can... the idea is just
>>> to use an external fuel pump to push it through to the regulator on
>>> the fuel bar - 2.5 above manifold pressure, max turbo pressure 1.3
>>> bar, so I'm thinking a pump pressure of six bar should be plenty...
>>> Nominal engine power is 220bhp, so 250 litres per hour?
>>> Makes sense?
>>> Neil
--
You received this message because you are subscribed to the Google Groups "Quantum
Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor
the individuals associated with the Quantum Owners Club or in the preparation of the
above information shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or indirectly by the
instructions contained within this or related message(s).