Hi All The reason for the rear glass un-glueing is due to flexure in the bodyshellat at the rear.
Just recently I have removed an electric sun roof from a coupe and replaced it with fibreglass (check out www.dynamicmouldings.co.uk) at the same time I also constructed a shaped section inside the roof above the rear window, much like above the front windscreen where the sun visors and interior light are mounted. This has strengthened the roof above the rear window considerably and as a bonus, has given a new place to mount a second interior light. I will have to wait and see what the owner reports on the glue giving way, but after discussing this with Harvey Wooldridge, I do have some other modifications I can try as well if this is not enough. Eddie On Mar 8, 10:51 pm, "Susan and Martin Scott" <[email protected]> wrote: > I used some glass etching paste to etch mine - just leave it on for a few > hours. I then found it takes a similar amount of time and lots of scrubbing > to remove all traces of > the etch paste from the glass. I'd recommend some other method (maybe as > Dave's note) - despite much scrubbing with a toothbrush some residue still > remains on my glass. Whether it helped adhesion? Only time will tell. > > > > ----- Original Message ----- > From: "Gary" <[email protected]> > To: <[email protected]> > Sent: Tuesday, March 08, 2011 9:56 PM > Subject: Re: [Quantum Owners] Re: Window adhesive failure > > Could ask one of those local glass engravers if they could do it. you > know the frosted names and pictures on tankards and vases etc. > Gary > > On 08/03/2011 21:47, Dave the Subbie wrote: > > I've sand-blasted the rear screen on my son's Coupe. It had come loose > > by the paint coming away from the glass. You could tell, because the > > paint was still attached to the adhesive. > > > I just masked the screen as shown in the build manual, then used a > > hand blasting gun with medium grade grit from MachineMart. Then used a > > screen glue kit from ebay, with a primer, then a black coat, then the > > adhesive. > > > So far, so good. Although I would imagine that you need a few years to > > be sure. > > > Andy Heaton gave me the idea, in a post on this group. Apparently, he > > has been using the technique (albeit using Scotchbrite pads) for some > > years. Other people seem to have done so. I only used the blaster > > because I happened to have it anyway. > > > We have lost some elements in the heated rear window, but I don't know > > if they were OK before. I did try to mask them, but I'm not sure if > > the tape damaged them. So that's something to be careful of, I > > suppose. > > > On Mar 7, 10:12 pm, aabill<[email protected]> wrote: > >> Hi > > >> I see from photos on the web of some other saloons that others have > >> the same problem as me - the windows, especially the rear ones, having > >> to be refitted approx every two years because the glass progressively > >> detaches from the adhesive (which never detaches from the shell). > > >> I have tried just about every brand of adhesive / primer and followed > >> instructions regarding cleanliness and priming meticulously, also got > >> one of the national windscreen replacement chains to replace them - > >> they said they were guaranteed to stay put for the life of the car but > >> they needed refitted after just two years, they refitted them again > >> under warranty and they detached again. > > >> The windscreen seems to stay put much longer. The original, fitted by > >> Quantum, showed no signs of detaching after 10 years. I had it > >> replaced due to wear and now 4 yrs later there are just one or two > >> small detached areas (yep - I've had my quantum 14 yrs :) ) > > >> Has anyone solved this or can shed any light on a way of permanently > >> attaching the rear glasses? > > >> Cheers > >> Bill A. > > -- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group > athttp://groups.google.com/group/quantumowners?hl=en > > IMPORTANT NOTE: All information presented herewith is provided on an "As Is" > basis, without warranty or the implication thereof. Neither the Quantum > Owners Club nor the individuals associated with the Quantum Owners Club or > in the preparation of the above information shall have any liability to any > person or entity with respect to liability, loss, or damage caused or > alleged to be caused directly or indirectly by the instructions contained > within this or related message(s). > > ----- > No virus found in this message. > Checked by AVG -www.avg.com > Version: 10.0.1204 / Virus Database:1497/3491- Release Date: 03/08/11 -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
