thanks very much for the information On Mar 23, 9:51 am, Steve Brabazon <[email protected]> wrote: > Hi, > > Our hood, my daughters really is not on the car yet as we decided to > see the winter through on the old one, > > We have trial fitted the hood by placing it over the frame and it > looks like everything will line up as it should. > > By the metal side supports if you mean the reinforcement just behind > the doors, then yes it does. The hood also comes with the press-studs > which you will need to put on yourself. If you don't have the tool to > turn them over he also sells them. > > The two things you don't get are the header-rail and fittings and on > our old hood there are two Tenax Fasteners which we intend to swap > over. > > Quality wise I don't think he is any better or any worse than anybody > else. I found him to be a very helpful person replying to my emails > within a few hours. > > Stevehttp://brabazon.org/Quantum.aspx
-- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
