You need one of those set-ups like the bike engined cars use for reverse, bolting a gear to the diff and driving that with the starter...
That'd do it :-) Ian On 1 June 2011 00:19, <[email protected]> wrote: > In a message dated 31/05/2011 11:33:35 GMT Daylight Time, > [email protected] writes: > > So if you just drove it into the test centre on the starter motor and > didn't fit an engine > > Does your starter motor drive through the gearbox? Mine drives through > the ring gear on the flywheel. > > I realize you were not entirely serious in your suggestion. > > Michael > > -- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group at > http://groups.google.com/group/quantumowners?hl=en > > IMPORTANT NOTE: All information presented herewith is provided on an "As > Is" basis, without warranty or the implication thereof. Neither the Quantum > Owners Club nor the individuals associated with the Quantum Owners Club or > in the preparation of the above information shall have any liability to any > person or entity with respect to liability, loss, or damage caused or > alleged to be caused directly or indirectly by the instructions contained > within this or related message(s). -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
