Assuming you are talking about the blacktop Zetec-R and not the Zetec-S
engines.
I can't specifically remember one in an H4 but it's certainly been done
in a 2+2
There's not a great difference between them and the earlier Zetecs.
The main thing with the ecu is that if you want to use the Ford ecu you
need to get a matching set of ECU and keys with the PATS sender in.
Also, the air flow meter, injectors etc etc all have to match the
ecu/engine.
Your best bet is to take everything off one car.
Either buy a written off car complete (preferable side or rear damage
as you can find expensive bits broken on the engine with front damage),
or get a scrapyard to let you have first access to one so you can get
everything you need of it.
Even if you did buy a new engine i'd still try and get everything else
off one car.
Jim
On 09/09/2011 18:05, reckless_b wrote:
Hi guys, has anyone or does anyone know if the focus zetec engine
could be fitted into the H4, and if it can what would it need
regarding ecu ect I have seen new engines on ebay at reasonable
prices, although when all the ancillaries are added maybe they are not
the bargain they seem. Regards Bill.
--
You received this message because you are subscribed to the Google Groups "Quantum
Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor
the individuals associated with the Quantum Owners Club or in the preparation of the
above information shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or indirectly by the
instructions contained within this or related message(s).
