Different question this one. I am planning to put a turbo on my Xtreme this winter and one of the issues is the thermostat housing cover. My Zetec cover is a straightforward domed cover with two holes drilled at 180 degress for the bolts and threaded for the fan stat. The engine is fitted from a Raceline water rail supplied by Q. To fit the turbo I need to have the top hose outlet at 90 deg to the current position ie facing forward. My next step is to scour the local scrappy to see if I can find similar. The question is does anyone know if the housing covers with two bolt holes at 180 deg are a standard size and spacing. I can remove it and measure to compare, but it woulod be helpful if they were standard. I will try to attach a photo on the photos page, but have never succeeded on this before. Thanks Nigel
PS I have tried contacting Raceline but no help so far. -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
