Hi all, So I was driving back to Wimbledon from Banbury a few weeks a go at night in the Xtreme, I went via Oxford ish and picked some nice country roads to drive on.. when I realised that it would be great to be able to see where I was going like I can in production road car - ie the Main Beam is a bit naff !!
So I have bought a pair of 55w Driving Lamps to add on. My question is does anyone have any idea as to what the rating is for the wiring that would be involved if I patched these onto the present main beam wiring. At present white ignition wire would have extra load on it? any idea what it is rated at amps wise? the main beam relay is fed from one 15amp fuse then each bulb has a separate wire from the same relay out post. I would need to up the fuse to 20amps at least, probably 25. then I could tack the extra lights one onto each main beam feed so they come on at the same time. Any ideas on what these wires are rated as ? any thoughts? (The unlazy and safe option if I can't find out any of the above is to add another relay and power them separately. Trying to be lazy if I can just add them on it will be a quickish job, adding the wiring a lot longer and more costly) cheers Chris -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
