I built a cat house in the back garden.
One cat liked it so much she decided to stop the other one going in.
So i had to convert it with an internal partition and another door so
they were semis !
Sorry, no Quantum stuff, no workshop yet !, the wrong sort of weather
for laying concrete slabs.
Jim
On 02/01/2012 20:12, Ian Harrison wrote:
Hi all.
I have managed to get a couple of things done over the break.
Trigger wheel fitted along with VR backet and sensor for Kremit's
megajolt project. This is just a trial fit (code for aligned the wheel
wrongly and have to redo...) ???
Installed a map and got my friend's Merlin Megajolt up and running.
2.1 pinto like mine but on 40DCOEs. It is not running the best he has
had it in 17 years!
Tried a new set of idle jets in my webers 45DCOEs. I currently have
60F8 in, but it is running rich although spitting back. So I tried
some 50F9 jets a friend had. The result was that we had to open up the
throttle plates to just the right place under the first progression
hole, but I think they were too far the other way and now too lean.
The thing we did discover whilst playing with things was the idle
mixture screws are knackered, so I have ordered a new set up and gone
back to the 60F8 ones.
I am hoping that the Megajolt will allow for a good advance on idle
and give a leaner jet to work without spitting.
Picked up my replacement gearbox so I can actually start that swap job
I have been talking about for 18 months...
I also cleaned up a drill press that was my father-in-laws before he
passed away. It has been sitting for a number of years now and really
appreciated some oil and grease, however it needs a new belt, as the
one on there now has a permanent kink...
What have you lot been up to?
Wishing you all a Happy New Year.
Ian
--
You received this message because you are subscribed to the Google
Groups "Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an
"As Is" basis, without warranty or the implication thereof. Neither
the Quantum Owners Club nor the individuals associated with the
Quantum Owners Club or in the preparation of the above information
shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or
indirectly by the instructions contained within this or related
message(s).
--
You received this message because you are subscribed to the Google Groups "Quantum
Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor
the individuals associated with the Quantum Owners Club or in the preparation of the
above information shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or indirectly by the
instructions contained within this or related message(s).
