Cheers Nigel. I was suspecting it was land between the bearings that would be different.
It's good to know they are the same and it may be nothing to worry about if they are tight initially like my NS hub was when it had its new bearing. The old school mechanic predicted that it would loosen up and not cause a problem. He's been right so far... Ian On 25 Jan 2012, at 06:00, nigelp <[email protected]> wrote: > Whoops, yes I was and desperately trying to remember where I got to. > I certainly haven't recorded anything. I did measure the Xtreme hub > and meant to measure the Sierra later and never did. I believe with > my vernier I did measure them and they were very within a gnats c---, > but my depth gauge wasn't ideal for the job and I didn't have time to > take them into work to properly measure and check. As we are only > looking at small variations they did need to be acurately measured and > I never did that. A long winded way of saying I don't really have any > meaningful data. > Wait I do remember borrowing a micrometer from work to measure the > land between the inner and outer bearings, the Xtreme was identical to > the Sierra. I hate posting bits of information, but this is all I can > remember. > Nigel > > -- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group at > http://groups.google.com/group/quantumowners?hl=en > > IMPORTANT NOTE: All information presented herewith is provided on an "As Is" > basis, without warranty or the implication thereof. Neither the Quantum > Owners Club nor the individuals associated with the Quantum Owners Club or in > the preparation of the above information shall have any liability to any > person or entity with respect to liability, loss, or damage caused or alleged > to be caused directly or indirectly by the instructions contained within this > or related message(s). -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
