It's exactly the problem I had.  It was a while ago now, so I can't
remember the details, but it did involve fully dismantling the odo down to
component parts and reassembling with a washer at one end.  I think it was
one of the drums catching on the bracket and so the washer was to space it
back out.  Probably because over the years of heat cycling and a bit of
abrasive wear there's just that bit too much slop in it.



On 19 March 2012 21:52, judder <[email protected]> wrote:

> It's a 2+2 on an F plate. I't quite frustrating, as I've nearly got it to
> work - can get the disc to turn by hand a few turns then it goes tight,
> causing the click and bounce.
>
> Stephen
>
> On Sunday, March 18, 2012 10:53:09 PM UTC, judder wrote:
>>
>> My Speedo has developed a fault in which the needle bounces about and
>> makes a loud clicking noise. I think it is related to the odometer not
>> turning. Does anyone have one for sale ?
>>
>> Thanks,
>> Stephen
>
> --
> You received this message because you are subscribed to the Google Groups
> "Quantum Owners Group" group.
> To post to this group, send email to [email protected]
> To unsubscribe from this group, send email to
> [email protected]
> For more options, visit this group at
> http://groups.google.com/group/quantumowners?hl=en
>
> IMPORTANT NOTE: All information presented herewith is provided on an "As
> Is" basis, without warranty or the implication thereof. Neither the Quantum
> Owners Club nor the individuals associated with the Quantum Owners Club or
> in the preparation of the above information shall have any liability to any
> person or entity with respect to liability, loss, or damage caused or
> alleged to be caused directly or indirectly by the instructions contained
> within this or related message(s).
>

-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).

Reply via email to