Ian, There was no template ever supplied, and the bits are oversized so don't logically fit anyway.
>From memory.... Large piece- Behind seats, cut around grp as too tight, but easy to fit (with no seats in !) matching rectangular pieces - under seats- don't fit well due to uneven panel, but don't move due to 4 bolts ! Central rectangle for handbrake - need to cut angle for the rear - easy to fit the wrong way around ! Under pedal areas - like a offshape hourglass Other bits can't remember, but as they are all too big, it may not matter. I did not find this a satisfactory part of the build, in particular there will be a join in front of the gear stick which is unsightly. Also avoid to close to a door (if you have them) as they just allow wind / rain through ! I have so far reglued many pieces - avoid tape it is not flexible enough, make the glue 'thick'. Good luck Andrew. On Monday, 3 September 2012 20:23:33 UTC+1, Ian Mac wrote: > > I haven't been on the discussion group for quite a while now: work and > family seem to absorb so much time: however.. > When I bought the Xtreme 3 years ago as a supposedly almost complete car, > it came with a load of pre-cut carpet, but no "map" of what goes where. > > Does anyone have a template diagram showing what piece goes where in the > car. I could probably work it out by trial and error, but thought I would > try the easy route of asking you guys first. > > Regards, > > Ian Mac > Xtreme 059 > -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
