Cheers Jim. Forgot to mention that it's an aftermarket central locking kit, not a Ford one.
Also what I was wondering was, is there a relay that could have a permanent live feed going into it and connections from the central locking wiring, so that when the momentary signal is sent from the control box it would switch the relay "on" or "off" & power would come from the relay to the LED or not depending on the position of the switch inside the relay. Hope this explains what it is I am trying to achieve but being a bear of simple brain I don't always make myself clear. If no such relay is available then I'll wire it in like you suggested. Andy On Monday, September 3, 2012 9:04:03 PM UTC+1, Andy Cowley (Q2-379) wrote: > > My 2+2 has central locking fitted (no alarm) & doesn't have a warning LED. > > I've got a flashing LED that I was going to wire in so that it came on > when the ignition was switched off, but am wondering whether I could > connect it to the wiring via a switching relay so that it came on when the > car was locked & went off when it was unlocked. > > Any help would be appreciated. > > Cheers > > Andy > -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
