good job there, i too am unsure on how to tackle the inner seal, i may just butt some thin foam up to it? On Thursday, February 14, 2013 5:38:51 PM UTC, Susan and Martin Scott wrote: > > > I had similar with the saloon - I sikaflexed the seal in place, keeping > it in place with the glass and a strip of wood & wedges whilst it dried. > That reminds me that I've only done one side! My temporary solution was a > suitable rubber trim which incidentaly is used (very successfully) as the > permanent fix for the Rickman range of vehicles. I still haven't decided > what to do on the inside of each window, as I want to keep the body > coloured door top (* *I know I'm old fashioned!) and the angle needs to > be acute for the seal. > I too avoided using sikaflex until I fitted the door mirrors (impossible > to bolt onto the saloon?). Having doubts I then tried to get one off (yes > a stupid thing to do) and found it was a bit tricky. I now have no doubts > about it's strength - indeed I used it (well a much cheaper alternative > from Toolstation) to attach a GRP sheet to a metal frame as a gate a couple > of years ago and it's good. >
-- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
