When i "rewired" my 2+2 i did nothing more complex than cut out the really bad bits (mainly the earths, did from scratch) and then traced each wire in situ end to end checking the entire length, didn't see the need to remove the whole loom since if the individual wires are sound and the insulation intact they ate as good as new, it was the end connections that caused problems but most got replaced, a haynes manual is invaluable along with all the good friendly advice on here, i couldn't have done mine without it
-- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
