The rear bumper should be held on at the front edge with a self tapper but it came out so it was attached using adhesive (tiger seal). That has unstuck so it needs reattaching either with a new self tapper or more adhesive. It is still held in place on the drivers side and across the back with the normal fixings. It's a five minute fix with adhesive.
The front bumper is still attached solidly but on the passenger side moves up and down by 3mm but its solidly attached. Probably needs a bolt or screw tightening. Or just left. I'm a perfectionist so these things annoy me. So solving the bumpers could be an 8 minute job. The bumpers are built solidly and either issue has been made by an sort of impact. Might just be due to the coilover suspension :) -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
