Hi all. Anybody any experiance with uprated engine mounts? I have a 2+ with zetec and am getting some nasty vibrations when pulling off under moderate acceleration. Recently installed new gearbox cradle rubbers, but the cam end mount is original to the kit Close inspection doesn't really reveal much, but a concern is the timing belt cover has been making contact with the engine mount on the front subframe. Immediate thoughts are to use something like powerflex mounts, but don't want to transfer noise and stress to the subframe. Any thoughts? Cheers Mark
-- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
