The oval plug doesn't plug into the fusebox, it plugs into the car loom
and that connects to the fusebox.
You either need to make up you own fuse and relay module or use the
Escort fusebox if you can find somewhere to put it.
Jim
On 06/12/2013 11:35, Sir Lancelot wrote:
Hi Jim,
Today I have found the transponder connector amongst other bits and
pieces so will connect that back up so I can now tie that back in.
I have most of the engine bay loom which ends with a 12 pin oval type
connector. This doesn't appear to fit into the fuse box anywhere and
these are the wires I am struggling with as everything else falls into
place.
At the moment I do not have the registration number but I am trying to
retrieve it.
Thanks for your help
On Thursday, December 5, 2013 11:09:00 PM UTC, Sir Lancelot wrote:
Hi,
Can anyone help me please? I am currently fitting a Zetec
engine to my Q. The ecu, wiring, key and transponder are all from
an Escort 1.8 GTi. There appears to be various different and
conflicting diagrams, on the net showing the ecu pinouts and I
have yet to find one showing the exact colours and same layout as
the one I have. Unfortunately I did not remove the loom myself and
do not have all the information I would have liked. Also
whereabouts does the key transponder fit in to the ecu?
The numbers on the ecu are: 98AB-12A650-ASA SLUG EEC-1V
Any help greatly appreciated
--
--
You received this message because you are subscribed to the Google
Groups "Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an
"As Is" basis, without warranty or the implication thereof. Neither
the Quantum Owners Club nor the individuals associated with the
Quantum Owners Club or in the preparation of the above information
shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or
indirectly by the instructions contained within this or related
message(s).
---
You received this message because you are subscribed to the Google
Groups "Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
--
--
You received this message because you are subscribed to the Google Groups "Quantum
Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor
the individuals associated with the Quantum Owners Club or in the preparation of the
above information shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or indirectly by the
instructions contained within this or related message(s).
---
You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
