Hi, I have an issue with Fuse 6 blowing, which cuts the engine, its identified on the fuse board as "Start Fuel Pump Rev SW Flash Ign for Insts" there is a seperate fuse for the Fuel Pump at F4 so unsure what the ref to pump is on this one, ammeter across F6 reveals a cranking amperage of over 10amps (limit of multimeter) and steady running current of around .25amp, a 15amp fuse has survived to get me home....
All other fuses ok, picure below, any thoughts appreciated, or info on what is connected etc? Its a Zetec engine on Omex 600 Picture <https://flic.kr/p/tLCeZE> Thanks Tony.R -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
