That would be great (part no) and thanks for the other info.

Yep hub is coming off and the local garage are going to swap the bearings
for me. Thinking about swapping the rover ball joints too whilst the hub is
off.

Cheers, Chris

On Wed, 23 Mar 2016, 20:46 Ian Harrison, <bighatp...@gmail.com> wrote:

> Hi Chris. I'll see if incan dig out the part number for you.
>
> The kits are not handed, you get inner and outer bearings, and a left and
> right handed nut along with the inner and outer seals.
>
> There are two bearings that fit in the hub. One goes in from the road side
> and one from the brake side. The hub has a 'land' in the middle that the
> bearing outer races sit on.
>
> Not an easy job though and the next one that I do will have the hub off
> the car and a press used on it.
>
> Good luck!
> Ian
>
>
> On Wednesday, 23 March 2016, Chris Young <chris.young...@gmail.com> wrote:
>
>> HI Ian,
>>
>> I need to replace a front wheel bearing on my xtreme.
>>
>> I've not taken it to bits yet, but any chance you could share the part
>> number for the skf bearing kits you bought?   are they left and right
>> handed?
>>
>> Also you mention inner and outer bearings,  could you elaborate? I
>> thought there was just one in there, or does the kit cover them both.
>>
>> thanks :)
>>
>> Chris
>>
>> On Sat, 31 Aug 2013 at 23:02 Ian Harrison <bighatp...@googlemail.com>
>> wrote:
>>
>>> Evening all.
>>>
>>> Xtreme's have bespoke uprights and I have heard other owners commenting
>>> on the bearings going tight when torqued up the the 'FT' setting of 310 to
>>> 350NM, and this is what happended to the nearside one the last time I had
>>> my bearings replaced at the garage up the road. They advised it loosen up
>>> quickly and it did, but it has only lasted a couple of years.
>>>
>>> So having a close look at it, the land in the upright has suffered quite
>>> a bit of abuse from a thug with a blunt object...
>>>
>>> I fettled the upright with a file, oilstone and scraper before refitting
>>> the nice shiny SKF bearing set and the proof of the pudding today was that
>>> when torqued up to 'FT' spec, the wheel still spins easily.
>>>
>>> So... If you have an Xtreme and it throws wheel bearings, check the
>>> uprights for damage and correct before fitting the new bearings.
>>>
>>> I have put some photos up on the proboards forum.
>>>
>>> Cheers
>>> Ian
>>> Read more:
>>> http://quantumforum.proboards.com/thread/699/xtreme-wheel-bearing#ixzz2daPqSjwU
>>>
>>> --
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Quantum Owners Group" group.
>>> To post to this group, send email to quantumowners@googlegroups.com
>>> To unsubscribe from this group, send email to
>>> quantumowners-unsubscr...@googlegroups.com
>>> For more options, visit this group at
>>> http://groups.google.com/group/quantumowners?hl=en
>>>
>>> IMPORTANT NOTE: All information presented herewith is provided on an "As
>>> Is" basis, without warranty or the implication thereof. Neither the Quantum
>>> Owners Club nor the individuals associated with the Quantum Owners Club or
>>> in the preparation of the above information shall have any liability to any
>>> person or entity with respect to liability, loss, or damage caused or
>>> alleged to be caused directly or indirectly by the instructions contained
>>> within this or related message(s).
>>> ---
>>> You received this message because you are subscribed to the Google
>>> Groups "Quantum Owners Group" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to quantumowners+unsubscr...@googlegroups.com.
>>> For more options, visit https://groups.google.com/groups/opt_out.
>>>
>> --
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Quantum Owners Group" group.
>> To post to this group, send email to quantumowners@googlegroups.com
>> To unsubscribe from this group, send email to
>> quantumowners-unsubscr...@googlegroups.com
>> For more options, visit this group at
>> http://groups.google.com/group/quantumowners?hl=en
>>
>> IMPORTANT NOTE: All information presented herewith is provided on an "As
>> Is" basis, without warranty or the implication thereof. Neither the Quantum
>> Owners Club nor the individuals associated with the Quantum Owners Club or
>> in the preparation of the above information shall have any liability to any
>> person or entity with respect to liability, loss, or damage caused or
>> alleged to be caused directly or indirectly by the instructions contained
>> within this or related message(s).
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "Quantum Owners Group" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to quantumowners+unsubscr...@googlegroups.com.
>>
> For more options, visit https://groups.google.com/d/optout.
>>
> --
> --
> You received this message because you are subscribed to the Google Groups
> "Quantum Owners Group" group.
> To post to this group, send email to quantumowners@googlegroups.com
> To unsubscribe from this group, send email to
> quantumowners-unsubscr...@googlegroups.com
> For more options, visit this group at
> http://groups.google.com/group/quantumowners?hl=en
>
> IMPORTANT NOTE: All information presented herewith is provided on an "As
> Is" basis, without warranty or the implication thereof. Neither the Quantum
> Owners Club nor the individuals associated with the Quantum Owners Club or
> in the preparation of the above information shall have any liability to any
> person or entity with respect to liability, loss, or damage caused or
> alleged to be caused directly or indirectly by the instructions contained
> within this or related message(s).
> ---
> You received this message because you are subscribed to the Google Groups
> "Quantum Owners Group" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to quantumowners+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
--- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quantumowners+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to