Good Morning All, Afraid that the old Magpie tendencies surfaced at the weekend and I now find myself the owner of a set of hubs, discs and calipers for a Focus ST170. (well, they were cheap..!) The idea being to fit them to the 2+2 if possible, and I wondered if anyone had done anything similar? The front discs are 300mm, and the calipers have the standard 90mm bolt spacing. however the holes in the lugs on the hub are 70mm from the hub centre on the 2+2 (standard XR2 hubs) and 80mm on the ST170. That leaves me with a few options: 1) make up some adaptor plates to fit them (doesn't look promising due to lack of space) 2) Fit smaller discs (say 280mm) which would still be significantly bigger than the XR2 ones, or 3) Use different calipers? The rear hubs have a 4-bolt fitting to the axle. I haven't checked if it is the same as the Fiesta pattern, but, to be honest, I'm less bothered with them, as I don't want to be over-braked at the rear. Still interesting to know if anyone has fitted them, though. It's not a top-priority job, but any information would be useful, please? Thank you Dave.
-- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
